Code Date City Venue Fees
OG055 13 - 17 May 2018 Dubai - UAE TBA $4,750 Register
TBA* = To be Announced   |  All fees are exclusive of VAT
Home » Seminars » Oil & Gas Technology » Advanced Casing Design

Introduction

This GLOMACS Oil & Gas Technology training seminar on Advanced Casing Design covers the relevant subjects required to understand the structural mechanics of down hole tubular. Material aspects, connection selection, performance properties, load cases, design factors, and buckling are just a few of the many topics that are covered.

This GLOMACS training seminar is designed to concentrate on the fundamentals, takes delegates through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. This introduces manufacture techniques, specifications, loading, design, and problems of casing strings. This helps attendants to understand casing techniques and the know how of the casing strings.

This GLOMACS Oil & Gas Technology training course on Advanced Casing Design also provides explanations and examples of all the aspects of oilfield tubular design. Both uniform and non-uniform loading is covered. Combination loading considerations are envisioned and design procedures are outlined and practiced. Design of tubulars for use in a corrosive environment is new addition.

Participants will be able to design casings for any well: onshore, offshore, high pressure and high temperature wells, horizontal and multilateral wells.

This GLOMACS training seminar will feature:

  • Understand the main functions, characteristics and different type of casing
  • Understand the geometric characteristics and properties of casing, and how these can affect performance
  • Appreciate the requirements for casing seat selection with regard to subsurface information

Objectives

By the end of this GLOMACS training seminar, participants will be able to:

  • Conduct casing design calculations for different load cases via different methods
  • Understand how buckling affects casing design limitations and show an appreciation for mitigating its effects
  • Appreciate the effects of temperature and wear on casing design
  • Understand how corrosion can reduce casing life/performance, recognize signs of corrosion

Training Methodology

This GLOMACS Oil & Gas Technology training course on Advanced Casing Design will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative.  It includes the following:

  • The basis for the published API tubular strengths
  • How to design drive pipe to sustain a compressive load
  • How to design conductor, intermediate, drilling liners, and production casing strings for burst, collapse and tension
  • How to select connections
  • How to take biaxial and triaxial loading into account
  • How to design for bending, point loading, ballooning, and buckling
  • How to take wear into consideration
  • How temperature reduces yields strength
  • Recommended sequence for combination considerations
  • A complete integrated procedure for designing oilfield tubulars

Organisational Impact

The organisation will gain, in sending their employees to attend this particular GLOMACS training seminar, the following:

  • Reduction in the cost of the casing and the proper selection of the grade and strength
  • Extending the well life and control it
  • Ensuring the well integrity and avoiding all risks

Personal Impact

  • Obtain integrating knowledge in casing design
  • Hone their knowledge and get the self-confidence for doing the proper casing design
  • Get the latest technology in designing the casing
  • Solving and avoiding the problems which impact on the cost reduction, and well integrity

Who Should Attend?

This GLOMACS training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Drilling Supervisor
  • Site Drilling Engineers
  • Project Engineers
  • Operation Engineers

Seminar Outline

DAY 1

Casing Profile and Casing Setting

  • Introduction
  • Purpose of Casing
  • Casing Profiles and Drilling Scenarios
    • Casing Profiles, Onshore Wells, Offshore Wells - Surface Wellhead, Offshore Wells - Surface Wellhead & Mudline Suspension
    • Offshore Wells - Subsea Wellhead; Drive, Structural & Conductor Casing, Surface Casing, Intermediate Casing, Production Casing, Liner
    • Design Requirements
    • Selection of Casing Seats
    • Conductor Casing, Surface Casing, Intermediate Casing, Drilling Liner, Production Casing
    • Differential Sticking, Geologic Factors
    • Casing and Relative Hole Sizes, Standard Casing and Hole Sizes
    • Pipe Mechanics
    • Pipe Designation Size, Weight, Grade, H2S and CO2 Service
  • Tubular Range Lengths & Colour Coding
    • Range lengths
    • API tubular marking and color coding
    • Markings
    • Color Coding
  • Mechanical Properties of Steel
    • General
    • Stress-Strain Diagram
    • Heat Treatment of Alloy Steels
    • Exercise on casing seat selection

DAY 2

Material Aspects and Performance Properties

  • Connections, API, Proprietary
  • Tension, Compression, Internal Yield Pressure
  • Collapse, Yield Strength and threshold
  • Fundamental Design Principles
    • Burst, Collapse, Tension / Compression
    • Triaxial, Buoyancy and Buoyancy Force
    • Buckling
  • Class Exercise

DAY 3

Casing Loading and Design Considerations

  •  Tubular Selection - Costs, Service Load Cases
  • Standard Load Cases
  • Service Life Design Load Equations
    • Calculating Procedures, Summary of Equations
    • Burst, Collapse, Axial Force (Tension/ Compression)
    • Triaxial Equivalent Stress Intensity, Example String Design (Hand Calculation, Class Exercise)
    • Production Casing and Tubing
  • Load Capacity Diagrams
    • Load vs. Depth, Design Factor vs. Depth
    • Triaxial Load Capacity
  • Introduction to TDAS / EXP
    • The Well Plan, Design / Analysis
    • Exercise

DAY 4

Special Design Condition

  • Casing Wear, Landing Considerations for Long Strings to Prevent Buckling
  • Liner Buckling Due to Set Down (Compression)
  • Compression and Burst, String to String Load Transfers, Multi String Affairs, Shock Rebound Loads, Trapped annulus pressure build up, and other trapped fluid concepts
  • Well Head Growth
  • Kick Tolerance
  • Torque and Drag, Casing Floatation, ERD Applications
  • API Standards Overview
    • Quality Providers / Users
    • Documents for P.O. Generation
    • API Standards
    • Specifications, Recommended Practices, Bulletins
    • Using API Specifications
    • Basic Handling and Running
    • Running Procedures, Running Equipment
    • Make up, Thread Compounds
    • Special Running Procedures for CRA products

DAY 5

Casing Design Workshops

  • Solving Examples
    • Surface Casing
    • Intermediate Casing
    • Production Casing
    • Liner

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Oil & Gas Technology » Advanced Casing Design

VAT Announcement: The Government of UAE have introduced Value Added Tax (VAT) on goods and services from 01-January-2018. In compliance with the legislation issued by the UAE Government, we will be applying a 5% VAT on the fees for all our programs and services offered from January 2018 as applicable and stipulated in the FTA circulars.

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.








Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.








Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Advanced Casing Design


Upcoming Dates

Code Date Venue Fees
OG055 13 - 17 May 2018 Dubai - UAE $4,750

Introduction

This GLOMACS Oil & Gas Technology training seminar on Advanced Casing Design covers the relevant subjects required to understand the structural mechanics of down hole tubular. Material aspects, connection selection, performance properties, load cases, design factors, and buckling are just a few of the many topics that are covered.

This GLOMACS training seminar is designed to concentrate on the fundamentals, takes delegates through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. This introduces manufacture techniques, specifications, loading, design, and problems of casing strings. This helps attendants to understand casing techniques and the know how of the casing strings.

This GLOMACS Oil & Gas Technology training course on Advanced Casing Design also provides explanations and examples of all the aspects of oilfield tubular design. Both uniform and non-uniform loading is covered. Combination loading considerations are envisioned and design procedures are outlined and practiced. Design of tubulars for use in a corrosive environment is new addition.

Participants will be able to design casings for any well: onshore, offshore, high pressure and high temperature wells, horizontal and multilateral wells.

This GLOMACS training seminar will feature:

  • Understand the main functions, characteristics and different type of casing
  • Understand the geometric characteristics and properties of casing, and how these can affect performance
  • Appreciate the requirements for casing seat selection with regard to subsurface information

Objectives

By the end of this GLOMACS training seminar, participants will be able to:

  • Conduct casing design calculations for different load cases via different methods
  • Understand how buckling affects casing design limitations and show an appreciation for mitigating its effects
  • Appreciate the effects of temperature and wear on casing design
  • Understand how corrosion can reduce casing life/performance, recognize signs of corrosion

Training Methodology

This GLOMACS Oil & Gas Technology training course on Advanced Casing Design will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative.  It includes the following:

  • The basis for the published API tubular strengths
  • How to design drive pipe to sustain a compressive load
  • How to design conductor, intermediate, drilling liners, and production casing strings for burst, collapse and tension
  • How to select connections
  • How to take biaxial and triaxial loading into account
  • How to design for bending, point loading, ballooning, and buckling
  • How to take wear into consideration
  • How temperature reduces yields strength
  • Recommended sequence for combination considerations
  • A complete integrated procedure for designing oilfield tubulars

Organisational Impact

The organisation will gain, in sending their employees to attend this particular GLOMACS training seminar, the following:

  • Reduction in the cost of the casing and the proper selection of the grade and strength
  • Extending the well life and control it
  • Ensuring the well integrity and avoiding all risks

Personal Impact

  • Obtain integrating knowledge in casing design
  • Hone their knowledge and get the self-confidence for doing the proper casing design
  • Get the latest technology in designing the casing
  • Solving and avoiding the problems which impact on the cost reduction, and well integrity

Who Should Attend?

This GLOMACS training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Drilling Supervisor
  • Site Drilling Engineers
  • Project Engineers
  • Operation Engineers

SEMINAR OUTLINE

DAY 1

Casing Profile and Casing Setting

  • Introduction
  • Purpose of Casing
  • Casing Profiles and Drilling Scenarios
    • Casing Profiles, Onshore Wells, Offshore Wells - Surface Wellhead, Offshore Wells - Surface Wellhead & Mudline Suspension
    • Offshore Wells - Subsea Wellhead; Drive, Structural & Conductor Casing, Surface Casing, Intermediate Casing, Production Casing, Liner
    • Design Requirements
    • Selection of Casing Seats
    • Conductor Casing, Surface Casing, Intermediate Casing, Drilling Liner, Production Casing
    • Differential Sticking, Geologic Factors
    • Casing and Relative Hole Sizes, Standard Casing and Hole Sizes
    • Pipe Mechanics
    • Pipe Designation Size, Weight, Grade, H2S and CO2 Service
  • Tubular Range Lengths & Colour Coding
    • Range lengths
    • API tubular marking and color coding
    • Markings
    • Color Coding
  • Mechanical Properties of Steel
    • General
    • Stress-Strain Diagram
    • Heat Treatment of Alloy Steels
    • Exercise on casing seat selection

DAY 2

Material Aspects and Performance Properties

  • Connections, API, Proprietary
  • Tension, Compression, Internal Yield Pressure
  • Collapse, Yield Strength and threshold
  • Fundamental Design Principles
    • Burst, Collapse, Tension / Compression
    • Triaxial, Buoyancy and Buoyancy Force
    • Buckling
  • Class Exercise

DAY 3

Casing Loading and Design Considerations

  •  Tubular Selection - Costs, Service Load Cases
  • Standard Load Cases
  • Service Life Design Load Equations
    • Calculating Procedures, Summary of Equations
    • Burst, Collapse, Axial Force (Tension/ Compression)
    • Triaxial Equivalent Stress Intensity, Example String Design (Hand Calculation, Class Exercise)
    • Production Casing and Tubing
  • Load Capacity Diagrams
    • Load vs. Depth, Design Factor vs. Depth
    • Triaxial Load Capacity
  • Introduction to TDAS / EXP
    • The Well Plan, Design / Analysis
    • Exercise

DAY 4

Special Design Condition

  • Casing Wear, Landing Considerations for Long Strings to Prevent Buckling
  • Liner Buckling Due to Set Down (Compression)
  • Compression and Burst, String to String Load Transfers, Multi String Affairs, Shock Rebound Loads, Trapped annulus pressure build up, and other trapped fluid concepts
  • Well Head Growth
  • Kick Tolerance
  • Torque and Drag, Casing Floatation, ERD Applications
  • API Standards Overview
    • Quality Providers / Users
    • Documents for P.O. Generation
    • API Standards
    • Specifications, Recommended Practices, Bulletins
    • Using API Specifications
    • Basic Handling and Running
    • Running Procedures, Running Equipment
    • Make up, Thread Compounds
    • Special Running Procedures for CRA products

DAY 5

Casing Design Workshops

  • Solving Examples
    • Surface Casing
    • Intermediate Casing
    • Production Casing
    • Liner

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2018. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube