Code Date Venue Fees
ME001 18 - 22 Nov 2018 Dubai - UAE $4,750 Register
Home » Seminars » Mechanical Engineering » Centrifugal Compressor & Steam Turbine

Introduction

This seminar entails a study of gas compression and expansion laws applied to industrial processes followed by an illustration of the different types of rotating machines usually encountered in plants, and their related aspects. The aim is to provide a satisfactory approach to the problems posed by compressors and turbines and the means to solve them.

Key highlights of the course are:

  • Understanding of monitoring techniques as applied to compressors and turbines
  • Ability to put in place measures to quantify equipment condition
  • Interface with and control service providers
  • Identify and specify new compressor and turbine plant

Objectives

At the end of this seminar, participants will have:

  • An understanding of the construction and operational constraints of centrifugal compressors and steam turbines
  • Knowledge of how to optimally maintain the equipment for the benefit of the company
  • Hints and Tips for practical application of monitoring technologies so as to achieve the best results

Training Methodology

The seminar will be conducted along workshop principles with formal lectures, case studies and interactive worked examples. Relevant case studies will be provided to illustrate the application of each tool in an operations environment. Each learning point will be re-enforced with practical exercises. There will be ample opportunities for discussion and sharing experiences.

Organisational Impact

Predictive maintenance of rotating plant is vital to the budgetary success of the operations organisation. On completion of this seminar, the delegate will be able to critically analyse the methodologies employed within the organisation and instigate improvements where required.

Personal Impact

Technical knowledge is key to effective control and peer respect within any maintenance organisation; when this is achieved personal satisfaction follows. This seminar will give the delegate the required level of technical knowledge and skill to achieve that personal satisfaction.

Who Should Attend?

  • Engineers, Operators, and Technicians in Maintenance, Engineering and Production
  • Anyone who wishes to update themselves on Maintenance Engineering Technologies, judges the suitability of these technologies for their needs, and learns how to implement them for the benefit of their organisations

Seminar Outline

DAY 1

Gas Laws & Compression Theory

Compression and Expansion Fundamentals

  • Gas Equations
    • Ideal gas equation and practical application
    • Isentropic, polytropic compression
    • Mass and volume capacity
  • Practical compression laws
    • Effect of process temperature
    • Power of compression
  • Mollier diagrams
    • For gas and steam

Compression and Expansion Mechanisms

  • Compression Basics
    • Euler's law, applications for compressors and turbines,
    • Characteristic curves
    • Velocities triangle
  • Blade types
    • Impulse profile and Reaction profile - where each type are used and why
  • Dynamic Effects
    • Mach number: effect on temperature, pressure and density
    • Subsonic and supersonic machines
  • Simple Calculations
    • Dimensionless coefficients, specific speeds

DAY 2

Practical Applications

Compressor and Turbine Performance and Operation

  • Affinity Laws for centrifugal impellers
    • Calculating effect of speed change
    • Calculating effect of impeller changes
  • Characteristic curves
    • Effect of change on operating and process parameters
  • Operational Problems
    • Surge
    • Stonewall
    • Range of working efficiency
  • Capacity control methods
    • Speed change
    • Inlet guide vanes
  • Commissioning
    • Pre start checks
    • Vibration survey
    • Runup/rundown analyses

DAY 3

Steam Plant & Turbines

Steam Turbines

  • Turbine Characteristics
    • Speed
    • Specific consumption
    • Efficiency
  • Steam Conditions
    • Influence of inlet steam state
    • Effects of exhaust steam
  • Control Systems
    • Speed governor
    • Pressure & temperature control systems
  • Safety devices
    • Overspeed
    • Overpressure
  • Associated Equipment
    • Condensers
    • Pumps
    • Boilers

DAY 4

Turbine Construction & Maintenance

Construction and Systems

  • Construction
    • Casings
    • Diaphragms
    • Stator
    • Blades
  • Bearings & Seals
    • Rotor, journal and thrust bearings
    • Internal and shaft seals
    • Coupling
  • Rotor Dynamics
    • Balance
    • Critical speeds
  • Associated Systems
    • Lubrication system
    • Seal systems
  • Typical mechanical incidents

DAY 5

Engineering Aspects

Engineering

  • API specifications
  • Information required for bidding
  • Factory tests

Accreditation

  • Quality Logo

In Association With

Oxford Management Centre

Oxford Management Centre

A GLOMACS - Oxford Management Centre collaboration aimed at providing the best training services and benefits to our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Mechanical Engineering » Centrifugal Compressor & Steam Turbine

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Centrifugal Compressor
& Steam Turbine

Design, Operations & Maintenance


Upcoming Dates

Code Date Venue Fees
ME001 18 - 22 Nov 2018 Dubai - UAE $4,750

Introduction

This seminar entails a study of gas compression and expansion laws applied to industrial processes followed by an illustration of the different types of rotating machines usually encountered in plants, and their related aspects. The aim is to provide a satisfactory approach to the problems posed by compressors and turbines and the means to solve them.

Key highlights of the course are:

  • Understanding of monitoring techniques as applied to compressors and turbines
  • Ability to put in place measures to quantify equipment condition
  • Interface with and control service providers
  • Identify and specify new compressor and turbine plant

Objectives

At the end of this seminar, participants will have:

  • An understanding of the construction and operational constraints of centrifugal compressors and steam turbines
  • Knowledge of how to optimally maintain the equipment for the benefit of the company
  • Hints and Tips for practical application of monitoring technologies so as to achieve the best results

Training Methodology

The seminar will be conducted along workshop principles with formal lectures, case studies and interactive worked examples. Relevant case studies will be provided to illustrate the application of each tool in an operations environment. Each learning point will be re-enforced with practical exercises. There will be ample opportunities for discussion and sharing experiences.

Organisational Impact

Predictive maintenance of rotating plant is vital to the budgetary success of the operations organisation. On completion of this seminar, the delegate will be able to critically analyse the methodologies employed within the organisation and instigate improvements where required.

Personal Impact

Technical knowledge is key to effective control and peer respect within any maintenance organisation; when this is achieved personal satisfaction follows. This seminar will give the delegate the required level of technical knowledge and skill to achieve that personal satisfaction.

Who Should Attend?

  • Engineers, Operators, and Technicians in Maintenance, Engineering and Production
  • Anyone who wishes to update themselves on Maintenance Engineering Technologies, judges the suitability of these technologies for their needs, and learns how to implement them for the benefit of their organisations

SEMINAR OUTLINE

DAY 1

Gas Laws & Compression Theory

Compression and Expansion Fundamentals

  • Gas Equations
    • Ideal gas equation and practical application
    • Isentropic, polytropic compression
    • Mass and volume capacity
  • Practical compression laws
    • Effect of process temperature
    • Power of compression
  • Mollier diagrams
    • For gas and steam

Compression and Expansion Mechanisms

  • Compression Basics
    • Euler's law, applications for compressors and turbines,
    • Characteristic curves
    • Velocities triangle
  • Blade types
    • Impulse profile and Reaction profile - where each type are used and why
  • Dynamic Effects
    • Mach number: effect on temperature, pressure and density
    • Subsonic and supersonic machines
  • Simple Calculations
    • Dimensionless coefficients, specific speeds

DAY 2

Practical Applications

Compressor and Turbine Performance and Operation

  • Affinity Laws for centrifugal impellers
    • Calculating effect of speed change
    • Calculating effect of impeller changes
  • Characteristic curves
    • Effect of change on operating and process parameters
  • Operational Problems
    • Surge
    • Stonewall
    • Range of working efficiency
  • Capacity control methods
    • Speed change
    • Inlet guide vanes
  • Commissioning
    • Pre start checks
    • Vibration survey
    • Runup/rundown analyses

DAY 3

Steam Plant & Turbines

Steam Turbines

  • Turbine Characteristics
    • Speed
    • Specific consumption
    • Efficiency
  • Steam Conditions
    • Influence of inlet steam state
    • Effects of exhaust steam
  • Control Systems
    • Speed governor
    • Pressure & temperature control systems
  • Safety devices
    • Overspeed
    • Overpressure
  • Associated Equipment
    • Condensers
    • Pumps
    • Boilers

DAY 4

Turbine Construction & Maintenance

Construction and Systems

  • Construction
    • Casings
    • Diaphragms
    • Stator
    • Blades
  • Bearings & Seals
    • Rotor, journal and thrust bearings
    • Internal and shaft seals
    • Coupling
  • Rotor Dynamics
    • Balance
    • Critical speeds
  • Associated Systems
    • Lubrication system
    • Seal systems
  • Typical mechanical incidents

DAY 5

Engineering Aspects

Engineering

  • API specifications
  • Information required for bidding
  • Factory tests

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube