Home » Seminars » Oil & Gas Technology » Corrosion Control in Gas, Oil & Water (Fast Track)

As of the moment, this course is currently not available on our training portfolio.
If you wish to inquire or request a run for this seminar, e-mail us at info@glomacs.ae or call us at +971 (04) 425 0700

Introduction

The production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are often present in produced fluids, and oxygen is sometimes a contaminant in the water used for injection. These acid gases increase the corrosivity of the waters to steel, and can significantly impact the safe operating life of production tubulars and equipment, production vessels, and transportation systems.

The presence or absence of multiple phases (gas, water, and oil or condensate) in the same system can complicate the problem of controlling corrosion. Internal corrosion in a tubing string, vessel, or pipeline can have a significant impact on corrosivity and is influenced by conditions such as temperature, the flow regime or pattern of fluids, water wetting and composition and surface condition of the steel in a tubing string, vessel, or pipeline can have a significant impact on corrosivity.

The potential consequences of internal pipeline corrosion represent both safety and economic concerns to various sectors of the industry. Mitigating corrosion is critical as the initiation corrosion cells can negatively affect the integrity of the pipeline in service. Additionally, the build up of corrosion and bacterial by-products on the pipe walls can cause problems at later stages of a pipeline’s operation life including under-deposit corrosion and contamination of fluids passing through the pipe.

The pipeline costs are a considerable part of the investment in the petro chemical industry, and for long-distance, large-diameter pipelines, they can become prohibitively high if the corrosivity of the fluid necessitates the use of corrosion-resistant alloys instead of carbon steel. Better understanding and control of the corrosion of carbon steel can increase its application range and therefore have a large economic impact.

Corrosion occurs in various forms, such as pitting corrosion from water droplets, embrittlement from hydrogen, and stress corrosion cracking from sulfide attack. Corrosion is fought by a complex system of monitoring, preventative repairs and careful use of materials.

This GLOMACS Oil & Gas Technology training seminar on Corrosion Control in Gas, Oil and Water provides an overview of refinery process units and specific process descriptions, and focuses on the examination and identification of metallurgical problems that occurs in process units and methods of monitoring and damage reduction.

Objectives

At the end of this GLOMACS training seminar participants will have learned about:

  • Corrosion Principles and Mechanisms
  • Types of Corrosion that are related to the Oil, Gas and Water
  • Materials of Construction for Refinery Applications
  • Corrosion Monitoring and Inspection Methods
  • Aspects of Corrosion Inspection and Anti-corrosion Management and Mitigation

Training Methodology

This GLOMACS Oil & Gas Technology training course on Corrosion Control in Gas, Oil & Water (Fast Track) combines structured and focused presentations and discussions of topics covered with relevant examples and question & answer sessions to maximize the benefits to the participants. Participants will be provided with comprehensive course notes and copies of all presentation material. These will be very valuable for detailed study and future reference.

Seminar Outline

DAY 1

Introduction to Corrosion 

  • General corrosion, Corrosion mechanisms, Types of corrosion, Causes of corrosion failures

Parameters influencing Corrosion in the Refining Industry 

  • Different hydro carbon streams, Sulfur, Acidity, (TAN) number, pH Control, Desalting, Distilling, High and Low temp corrosion

Day 2  

Types of Corrosion in the Refinery Industry, related to Oil, Gas and Water 

  • Wet H2S cracking, Causes, Hydrogen Induced Cracking and stress-oriented hydrogen induced Cracking (HIC/ SOHIC), Hydrogen Blistering.
  • Naphthenic Acid Corrosion
  • Carbonate Cracking (CC)
  • Chlorine Stress Corrosion Cracking
  • Ammonia Stress Corrosion Cracking
  • Caustic Cracking
  • Amine Plant Corrosion
  • Microbiologically Induced Corrosion (MIC)
  • Pitting Corrosion
  • Erosion Corrosion
  • Crevice Corrosion
  • Corrosion Under Lining
  • Bimetallic Corrosion

Day 3  

Materials of Construction for Refinery Applications 

  • Common Materials in the Refinery Industry
  • Carbon Steel
  • Low Alloy Steels containing chromium and molybdenum,
  • Stainless steels
  • Nickel based alloys
  • Selecting the proper material for the application

Corrosion Protection and Monitoring 

  • Coatings and linings
  • Inhibitors, Types, Efficiency, Selection, H2S scavenger, Batch and continuous injection treatment

Corrosion Monitoring Methods 

  • Off-Line Checks
  • Corrosion coupons, probes
  • On-line systems, types of on-line corrosion monitoring technologies such as Linear Polarization Resistance, Electrochemical Noise and Electrical Resistance

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Oil & Gas Technology » Corrosion Control in Gas, Oil & Water (Fast Track)

VAT Announcement: The Government of UAE have introduced Value Added Tax (VAT) on goods and services from 01-January-2018. In compliance with the legislation issued by the UAE Government, we will be applying a 5% VAT on the fees for all our programs and services offered from January 2018 as applicable and stipulated in the FTA circulars.

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.








Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2018. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.








Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube