Code Date Venue Fees
MN045 07 - 11 Oct 2018 Dubai - UAE $4,750 Register
Home » Seminars » Maintenance Engineering » Couplings & Shaft Alignment

Introduction

This training seminar will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or turbine. The training seminar will indicate the importance of good installation, maintenance and failure analysis of couplings. The topics are specially designed for engineers and technicians that have had limited exposure to couplings and need to upgrade their technical knowledge about coupling characteristics and various operating loads. The focus in the training seminar will be on problem detection, root cause analysis and failure prevention.

Shaft alignment is a technical skill that is categorized as a specialty. It requires measurement instruments and relies on technician’s skill and experience if good results are to be expected on pumps, compressors or turbines. This training seminar will provide an integral training knowledge and experience of shaft alignment to solve misalignment problems in rotating machinery. Emphasis will be on the ways to analyze, identify and correct the root causes of misalignment, unbalancing and vibration in order to achieve smooth operation, and improved machine performance.

The training seminar will include discussions of various real practical problems and case studies from the existing engineering practice, which will be solved in the form of several workshops.

The training seminar will highlight:

  • Importance of proper selection of couplings
  • Guidelines for coupling installation: mounting and dismounting
  • Common coupling problems and potential failures
  • Effects of shaft alignment
  • Best methods and techniques for measurement of shaft alignment
  • Effects of misalignment on pump and compressor operation

Objectives

At the end of training seminar, you will learn:

  • Guidelines for good coupling installation
  • Solving common coupling problems and failure prevention
  • Vibration monitoring related to coupling health and machinery performance
  • Methods and practices for efficient alignment of rotating machine
  • Use of classical reverse dial methodology and modern laser optic technique

Training Methodology

The training seminar will be conducted along workshop principles with formal lectures and interactive examples, which will result in the active participation of all delegates in discussions and teamwork of problem solving. Real life examples will be selected to be solved during several workshop in the form of team work which will enable understanding of the physical insight of the problems and will illustrate the efficient application of evaluation tools. There will be ample opportunities for active, open discussions and sharing professional experiences on various industrial applications. All training course materials will be provided.

Organisational Impact

On completion of this training seminar, the delegate will be able to analyse the operation of rotating machine and associated equipment installed within the organization and suggest potential improvements where required.

The knowledge gained in this training seminar will: 

  • Enable the delegate to optimize the operation of rotating machine
  • Give the delegate confidence to analyse efficiency of machine operation
  • Enable measures to improve machine operation for the given application
  • Give better handling of machine condition monitoring, maintenance and troubleshooting

Personal Impact

  • Improved confidence when solving problems of rotating machinery
  • Better grasp of how good functioning of rotating machine impacts plant efficiency
  • Better knowledge of equipment operation and instrumentation on failure prevention
  • Improved personal skills for machine operation analysis
  • Better ability to troubleshoot complex and difficult problems

Who Should Attend?

  • Professionals dealing with the operation and maintenance of rotating equipment
  • New technicians who wish to improve knowledge and skills
  • Those who are involved in condition monitoring and vibration analysis
  • Maintenance technicians who are in charge of correcting the machinery problems
  • Engineers and maintenance planners involved in machine’s condition monitoring

Seminar Outline

DAY 1

Couplings: Types, Application & Operation

  • Classification & Application of Couplings
  • Characteristics of Rigid Couplings
  • Characteristics of Flexible Couplings
  • Selection of Parameters of Couplings for Pumps & Compressors and Turbines
  • Advantages & Disadvantages of Different Types

DAY 2

Couplings: Installation, Maintenance & Troubleshooting

  • Installation Best Practices & Safety Issues
  • Coupling Inspection in Operation
  • Vibration Monitoring and Analysis
  • Preventive Maintenance & Condition Monitoring
  • Failure Prevention & Troubleshooting

DAY 3

Shaft Alignment Basics

  • Need for Shaft Alignment
  • Effects of Shaft Misalignment
  • Types of Misalignment: offset and angularity
  • Measuring Techniques
  • Rim and Face Alignment Method: TIR Determination

DAY 4

Alignment Measurement Methods

  • Reverse Dial Methodology
  • Correcting Misalignment: foundation and soft foot
  • Thermal Growth Determination
  • Laser Optic Technique
  • Misalignment detected by Vibration Monitoring

DAY 5

Effect of Misalignment on Bearings & Seals

  • Effect of Misalignment of Bearings
  • Vibration Monitoring results as indication of Misalignment
  • Effect of Misalignment on Seals of Pumps and Compressors
  • Leakage Control & Prevention
  • Summary and Conclusions

Accreditation

  • Quality Logo

In Association With

Oxford Management Centre

Oxford Management Centre

A GLOMACS - Oxford Management Centre collaboration aimed at providing the best training services and benefits to our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Maintenance Engineering » Couplings & Shaft Alignment

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Couplings & Shaft Alignment


Upcoming Dates

Code Date Venue Fees
MN045 07 - 11 Oct 2018 Dubai - UAE $4,750

Introduction

This training seminar will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or turbine. The training seminar will indicate the importance of good installation, maintenance and failure analysis of couplings. The topics are specially designed for engineers and technicians that have had limited exposure to couplings and need to upgrade their technical knowledge about coupling characteristics and various operating loads. The focus in the training seminar will be on problem detection, root cause analysis and failure prevention.

Shaft alignment is a technical skill that is categorized as a specialty. It requires measurement instruments and relies on technician’s skill and experience if good results are to be expected on pumps, compressors or turbines. This training seminar will provide an integral training knowledge and experience of shaft alignment to solve misalignment problems in rotating machinery. Emphasis will be on the ways to analyze, identify and correct the root causes of misalignment, unbalancing and vibration in order to achieve smooth operation, and improved machine performance.

The training seminar will include discussions of various real practical problems and case studies from the existing engineering practice, which will be solved in the form of several workshops.

The training seminar will highlight:

  • Importance of proper selection of couplings
  • Guidelines for coupling installation: mounting and dismounting
  • Common coupling problems and potential failures
  • Effects of shaft alignment
  • Best methods and techniques for measurement of shaft alignment
  • Effects of misalignment on pump and compressor operation

Objectives

At the end of training seminar, you will learn:

  • Guidelines for good coupling installation
  • Solving common coupling problems and failure prevention
  • Vibration monitoring related to coupling health and machinery performance
  • Methods and practices for efficient alignment of rotating machine
  • Use of classical reverse dial methodology and modern laser optic technique

Training Methodology

The training seminar will be conducted along workshop principles with formal lectures and interactive examples, which will result in the active participation of all delegates in discussions and teamwork of problem solving. Real life examples will be selected to be solved during several workshop in the form of team work which will enable understanding of the physical insight of the problems and will illustrate the efficient application of evaluation tools. There will be ample opportunities for active, open discussions and sharing professional experiences on various industrial applications. All training course materials will be provided.

Organisational Impact

On completion of this training seminar, the delegate will be able to analyse the operation of rotating machine and associated equipment installed within the organization and suggest potential improvements where required.

The knowledge gained in this training seminar will: 

  • Enable the delegate to optimize the operation of rotating machine
  • Give the delegate confidence to analyse efficiency of machine operation
  • Enable measures to improve machine operation for the given application
  • Give better handling of machine condition monitoring, maintenance and troubleshooting

Personal Impact

  • Improved confidence when solving problems of rotating machinery
  • Better grasp of how good functioning of rotating machine impacts plant efficiency
  • Better knowledge of equipment operation and instrumentation on failure prevention
  • Improved personal skills for machine operation analysis
  • Better ability to troubleshoot complex and difficult problems

Who Should Attend?

  • Professionals dealing with the operation and maintenance of rotating equipment
  • New technicians who wish to improve knowledge and skills
  • Those who are involved in condition monitoring and vibration analysis
  • Maintenance technicians who are in charge of correcting the machinery problems
  • Engineers and maintenance planners involved in machine’s condition monitoring

SEMINAR OUTLINE

DAY 1

Couplings: Types, Application & Operation

  • Classification & Application of Couplings
  • Characteristics of Rigid Couplings
  • Characteristics of Flexible Couplings
  • Selection of Parameters of Couplings for Pumps & Compressors and Turbines
  • Advantages & Disadvantages of Different Types

DAY 2

Couplings: Installation, Maintenance & Troubleshooting

  • Installation Best Practices & Safety Issues
  • Coupling Inspection in Operation
  • Vibration Monitoring and Analysis
  • Preventive Maintenance & Condition Monitoring
  • Failure Prevention & Troubleshooting

DAY 3

Shaft Alignment Basics

  • Need for Shaft Alignment
  • Effects of Shaft Misalignment
  • Types of Misalignment: offset and angularity
  • Measuring Techniques
  • Rim and Face Alignment Method: TIR Determination

DAY 4

Alignment Measurement Methods

  • Reverse Dial Methodology
  • Correcting Misalignment: foundation and soft foot
  • Thermal Growth Determination
  • Laser Optic Technique
  • Misalignment detected by Vibration Monitoring

DAY 5

Effect of Misalignment on Bearings & Seals

  • Effect of Misalignment of Bearings
  • Vibration Monitoring results as indication of Misalignment
  • Effect of Misalignment on Seals of Pumps and Compressors
  • Leakage Control & Prevention
  • Summary and Conclusions

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube