Code Date Venue Fees
CC008 10 - 14 Dec 2017 Dubai - UAE $4,500 Register
CC008 16 - 20 Dec 2018 Dubai - UAE $4,750 Register
Home » Seminars » Civil & Construction Engineering » Design Blast Resistance Buildings for Oil & Gas Field

Introduction

This GLOMACS Civil & Construction Engineering training seminar will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ballast load. The dynamic analysis technique will be presented, as well as the new materials as CFRP to be used to protect the structure from the blast load.

The training seminar content relies heavily on the recently revised ASCE publication for the Design of Blast Resistant-Buildings in Petrochemical Facilities. The design management procedure for industrial projects will be clarified and the entire load that affects the structure building in oil and gas facilities will also be illustrated.

This training seminar will feature:

  • The concrete and steel structure design principal in selecting the suitable structure system
  • The materials response and characteristics
  • The CFRP design principal to resist the building against the blast load
  • The integrity management system procedure, taking into consideration the major factors in design, construction and repair to maintain the concrete structure economically in all its lifetime

Objectives

  • Familiarity with any problem and its solution in the concrete structure in the petrochemical industry and its causes of failure
  • Familiarize participants with the issues, standards, and procedures used to design structures that resist blast loads
  • Provide participants with in-depth knowledge of the principles of dynamic analysis
  • Develop basic competence in the use of available engineering methods for calculating blast loads and dynamic structural response
  • Provide an overview of the design approach used for typical construction materials (steel, concrete, masonry), Systems (shear walls and frames), non-structural components (doors and windows)

Training Methodology

This Civil & Construction Engineering training course will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. The illustration will depend on videos and photos.

 

Organisational Impact

  • Reduce the cost by knowing the most economic way to design blast resistance building
  • Improve organization structure behavior by Up to date technology will discuss and its practically in real project
  • Reduce the cost of structure failure by new ideas to enhance building design
  • Protect the organization investment by provide a structure can with stand the blast load

Personal Impact

  • The trainee will understand the structure dynamic behavior
  • Increase knowledge of up to date of execution phase for blast resistance
  • Increase the skill for design blast resistance building
  • Increase the skill to review the engineering of blast resistance building

Who Should Attend?

This training programme is designed for and will greatly benefit:

  • Construction Civil Engineers
  • Construction Structural engineers
  • Junior and Senior Structural Engineers
  • Project Engineers
  • Engineering Managers

Seminar Outline

DAY 1

Loads in Different Design Codes

  • Design Management process
  • Control the design of the industrial projects
  • Define the load on the industrial structure
  • BS and ACI code in design of concrete

DAY 2

Characteristics of Blast Load

  • Reason for blast load
  • Blast load effect and calculation
  • Pressure Vs time Characteristic
  • Load combination with blast load
  • Joints ductility / response to blast loads
  • Special detailing of Blast Resistant structures
  • Fragment impact , positive/negative phase duration
  • Behavior of structural members / damages forecast 
  • Progressive collapse

DAY 3

Materials Behavior under Blast Load

  • Dynamic material strength
  • Materials and structure element type
  • Dynamic materials
  • Deformation limits
  • Dynamic increase factor
  • Elastic , Elasto-Plastic & Plastic deformation due to blast loads
  • Inspection and maintenance plan
  • Evaluation of existing structure

DAY 4

Case Study Workshop

  • Dynamic analysis method
  • Design procedure
  • Typical detail for the connection
  • Upgrade existing building
  • Workshop for case study concrete structure
  • Workshop for steel structure
  • Construction precaution to achieve design requirement

DAY 5

Using CFRP for Blast Resistance

  • The inspection and monitoring procedure to control the construction
  • CFRP principal and design
  • Doors and walls resistance specs to resist blast load
  • Advanced materials for protection
  • Precaution in control room design

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Civil & Construction Engineering » Design Blast Resistance Buildings for Oil & Gas Field

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Design Blast Resistance Buildings
for Oil & Gas Field


Upcoming Dates

Code Date Venue Fees
CC008 10 - 14 Dec 2017 Dubai - UAE $4,500
CC008 16 - 20 Dec 2018 Dubai - UAE $4,750

Introduction

This GLOMACS Civil & Construction Engineering training seminar will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ballast load. The dynamic analysis technique will be presented, as well as the new materials as CFRP to be used to protect the structure from the blast load.

The training seminar content relies heavily on the recently revised ASCE publication for the Design of Blast Resistant-Buildings in Petrochemical Facilities. The design management procedure for industrial projects will be clarified and the entire load that affects the structure building in oil and gas facilities will also be illustrated.

This training seminar will feature:

  • The concrete and steel structure design principal in selecting the suitable structure system
  • The materials response and characteristics
  • The CFRP design principal to resist the building against the blast load
  • The integrity management system procedure, taking into consideration the major factors in design, construction and repair to maintain the concrete structure economically in all its lifetime

Objectives

  • Familiarity with any problem and its solution in the concrete structure in the petrochemical industry and its causes of failure
  • Familiarize participants with the issues, standards, and procedures used to design structures that resist blast loads
  • Provide participants with in-depth knowledge of the principles of dynamic analysis
  • Develop basic competence in the use of available engineering methods for calculating blast loads and dynamic structural response
  • Provide an overview of the design approach used for typical construction materials (steel, concrete, masonry), Systems (shear walls and frames), non-structural components (doors and windows)

Training Methodology

This Civil & Construction Engineering training course will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative. The illustration will depend on videos and photos.

 

Organisational Impact

  • Reduce the cost by knowing the most economic way to design blast resistance building
  • Improve organization structure behavior by Up to date technology will discuss and its practically in real project
  • Reduce the cost of structure failure by new ideas to enhance building design
  • Protect the organization investment by provide a structure can with stand the blast load

Personal Impact

  • The trainee will understand the structure dynamic behavior
  • Increase knowledge of up to date of execution phase for blast resistance
  • Increase the skill for design blast resistance building
  • Increase the skill to review the engineering of blast resistance building

Who Should Attend?

This training programme is designed for and will greatly benefit:

  • Construction Civil Engineers
  • Construction Structural engineers
  • Junior and Senior Structural Engineers
  • Project Engineers
  • Engineering Managers

SEMINAR OUTLINE

DAY 1

Loads in Different Design Codes

  • Design Management process
  • Control the design of the industrial projects
  • Define the load on the industrial structure
  • BS and ACI code in design of concrete

DAY 2

Characteristics of Blast Load

  • Reason for blast load
  • Blast load effect and calculation
  • Pressure Vs time Characteristic
  • Load combination with blast load
  • Joints ductility / response to blast loads
  • Special detailing of Blast Resistant structures
  • Fragment impact , positive/negative phase duration
  • Behavior of structural members / damages forecast 
  • Progressive collapse

DAY 3

Materials Behavior under Blast Load

  • Dynamic material strength
  • Materials and structure element type
  • Dynamic materials
  • Deformation limits
  • Dynamic increase factor
  • Elastic , Elasto-Plastic & Plastic deformation due to blast loads
  • Inspection and maintenance plan
  • Evaluation of existing structure

DAY 4

Case Study Workshop

  • Dynamic analysis method
  • Design procedure
  • Typical detail for the connection
  • Upgrade existing building
  • Workshop for case study concrete structure
  • Workshop for steel structure
  • Construction precaution to achieve design requirement

DAY 5

Using CFRP for Blast Resistance

  • The inspection and monitoring procedure to control the construction
  • CFRP principal and design
  • Doors and walls resistance specs to resist blast load
  • Advanced materials for protection
  • Precaution in control room design

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube