Code Date Venue Fees
EL003 14 - 18 Oct 2018 Dubai - UAE $4,750 Register
Home » Seminars » Electrical Engineering » Electrical Installations & Maintenance

Introduction

This GLOMACS Electrical Installations & Maintenance training course begins with the fundamental principles that always apply to ensure safety. The training course then progresses through basic design procedures, inspection, testing and maintenance requirements, concluding with a review of power quality problems that affect the reliability of an installation where high technology interfaces with a supply.

The electrical designer, installer and maintenance team are all expected to provide an installation that is safe, cost effective and reliable throughout its lifetime.

This training course will provide an understanding of:

  • The initial assessment of an installation prior to the design
  • Selection of protective devices
  • Cable sizing and installation
  • Inspection and testing procedures
  • The maintenance requirements

Objectives

The delegate on this training seminar will gain detailed appreciation of:

  • The safety factors required by national and international standards
  • The functional considerations that a designer has to take into account
  • How new technology can impact on the design particularly power quality
  • Safety requirements during installation, inspection and testing
  • Inspection and testing techniques that affect the maintenance requirements
  • How to improve productivity by improving the reliability of an installation

Training Methodology

This Electrical Engineering training seminar is conducted as modular lectures with encouragement for the delegate to interact. Case studies are included to illustrate how problems can develop as technology changes.

A design project is included in this training seminar to enable the delegate to practice the techniques of calculating the parameters of loads, protective devices and cable sizing for safety and functional purposes. Questions are welcomed throughout the training programme and during break sessions.

Organisational Impact

  • The additional knowledge will help in the design of new electrical installations
  • This knowledge will help in upgrading an existing installation when new technology is to be added
  • The training course will help an organisation to improve its effectiveness in ensuring compliance with standards
  • Knowledge of the impact of new technology will help in ensuring reliability of an installation
  • Knowledge of the design implications to withstand failures due to power quality
  • How inspection, testing and maintenance improve the resilience of an installation

Personal Impact

On successful completion of this training seminar, delegates will understand:

  • The basis for safety and functional design
  • How to assess the characteristics needed to commence a design process
  • The earthing and bonding requirements of an installation for safety and function
  • How new technology impacts on new and existing electrical installations
  • Inspection and testing techniques that affect the maintenance routine of an installation
  • How to improve productivity by improving power quality

Who Should Attend?

This training programme is aimed at personnel who would like to expand their knowledge of the safety and functional design of an electrical installation and is aimed at:

  • Mechanical and Electrical Engineers
  • Mechanical and Electrical Technicians
  • Electricians
  • Maintenance personnel with responsibility for an electrical installation

Seminar Outline

DAY 1

Preliminary Design Requirements

The design process requires consideration of the installation requirements with respect to the load characteristics, the circuit arrangements, and the source of supply.

  • Building Services
  • Purpose of an Installation
  • Cables
  • External Influences
  • Transformers
  • Compatibility
  • Protective Devices
  • Maintainability

DAY 2

Design Characteristics

To enable work to begin on any electrical installation a detailed specification is required. This specification will be based on the safety and functional requirements considered in Day 1.

  • Electrical Safety
  • Cable Installation
  • IEC 60364
  • Terminations
  • Wiring Regulations
  • Inspection and Testing
  • Cable Sizing
  • Documentation

DAY 3

Designing an Installation

Building on the first two days of the training course this module puts into practice the theories developed.

  • Single Phase Design
  • Power Quality
  • Three Phase Design
  • Cable Requirements
  • Protective Device Selection
  • Installation Method
  • Earthing and Bonding
  • Source of Supply

DAY 4

Commissioning and Testing

The requirements for any maintenance routine begin during the design process and continue though installation into operation. In many countries there is also a legal requirement to maintain an installation in a safe condition.

  • The need to maintain
  • Test results
  • What is Maintenance
  • Documentation
  • Introduction to Commissioning
  • Harmonics
  • Inspection
  • Earth Leakage

DAY 5

Periodic Maintenance

After the initial verification of the safety and function of the installation it is necessary to ensure that safety remains effective throughout the lifetime of the installation.

  • Maintenance Planning
  • Periodic Inspection
  • Equipment Reliability
  • Complex Testing
  • Categories of System
  • Harmonic Analysis
  • Safety Critical
  • Records

Accreditation

  • Quality Logo

In Association With

Oxford Management Centre

Oxford Management Centre

A GLOMACS - Oxford Management Centre collaboration aimed at providing the best training services and benefits to our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Electrical Engineering » Electrical Installations & Maintenance

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Electrical Installations & Maintenance
Design, Inspection/Testing, Maintenance and Resilience


Upcoming Dates

Code Date Venue Fees
EL003 14 - 18 Oct 2018 Dubai - UAE $4,750

Introduction

This GLOMACS Electrical Installations & Maintenance training course begins with the fundamental principles that always apply to ensure safety. The training course then progresses through basic design procedures, inspection, testing and maintenance requirements, concluding with a review of power quality problems that affect the reliability of an installation where high technology interfaces with a supply.

The electrical designer, installer and maintenance team are all expected to provide an installation that is safe, cost effective and reliable throughout its lifetime.

This training course will provide an understanding of:

  • The initial assessment of an installation prior to the design
  • Selection of protective devices
  • Cable sizing and installation
  • Inspection and testing procedures
  • The maintenance requirements

Objectives

The delegate on this training seminar will gain detailed appreciation of:

  • The safety factors required by national and international standards
  • The functional considerations that a designer has to take into account
  • How new technology can impact on the design particularly power quality
  • Safety requirements during installation, inspection and testing
  • Inspection and testing techniques that affect the maintenance requirements
  • How to improve productivity by improving the reliability of an installation

Training Methodology

This Electrical Engineering training seminar is conducted as modular lectures with encouragement for the delegate to interact. Case studies are included to illustrate how problems can develop as technology changes.

A design project is included in this training seminar to enable the delegate to practice the techniques of calculating the parameters of loads, protective devices and cable sizing for safety and functional purposes. Questions are welcomed throughout the training programme and during break sessions.

Organisational Impact

  • The additional knowledge will help in the design of new electrical installations
  • This knowledge will help in upgrading an existing installation when new technology is to be added
  • The training course will help an organisation to improve its effectiveness in ensuring compliance with standards
  • Knowledge of the impact of new technology will help in ensuring reliability of an installation
  • Knowledge of the design implications to withstand failures due to power quality
  • How inspection, testing and maintenance improve the resilience of an installation

Personal Impact

On successful completion of this training seminar, delegates will understand:

  • The basis for safety and functional design
  • How to assess the characteristics needed to commence a design process
  • The earthing and bonding requirements of an installation for safety and function
  • How new technology impacts on new and existing electrical installations
  • Inspection and testing techniques that affect the maintenance routine of an installation
  • How to improve productivity by improving power quality

Who Should Attend?

This training programme is aimed at personnel who would like to expand their knowledge of the safety and functional design of an electrical installation and is aimed at:

  • Mechanical and Electrical Engineers
  • Mechanical and Electrical Technicians
  • Electricians
  • Maintenance personnel with responsibility for an electrical installation

SEMINAR OUTLINE

DAY 1

Preliminary Design Requirements

The design process requires consideration of the installation requirements with respect to the load characteristics, the circuit arrangements, and the source of supply.

  • Building Services
  • Purpose of an Installation
  • Cables
  • External Influences
  • Transformers
  • Compatibility
  • Protective Devices
  • Maintainability

DAY 2

Design Characteristics

To enable work to begin on any electrical installation a detailed specification is required. This specification will be based on the safety and functional requirements considered in Day 1.

  • Electrical Safety
  • Cable Installation
  • IEC 60364
  • Terminations
  • Wiring Regulations
  • Inspection and Testing
  • Cable Sizing
  • Documentation

DAY 3

Designing an Installation

Building on the first two days of the training course this module puts into practice the theories developed.

  • Single Phase Design
  • Power Quality
  • Three Phase Design
  • Cable Requirements
  • Protective Device Selection
  • Installation Method
  • Earthing and Bonding
  • Source of Supply

DAY 4

Commissioning and Testing

The requirements for any maintenance routine begin during the design process and continue though installation into operation. In many countries there is also a legal requirement to maintain an installation in a safe condition.

  • The need to maintain
  • Test results
  • What is Maintenance
  • Documentation
  • Introduction to Commissioning
  • Harmonics
  • Inspection
  • Earth Leakage

DAY 5

Periodic Maintenance

After the initial verification of the safety and function of the installation it is necessary to ensure that safety remains effective throughout the lifetime of the installation.

  • Maintenance Planning
  • Periodic Inspection
  • Equipment Reliability
  • Complex Testing
  • Categories of System
  • Harmonic Analysis
  • Safety Critical
  • Records

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube