Code Date Venue Fees
EL032 19 - 23 Nov 2017 Dubai - UAE $4,500 Register
EL032 12 - 16 Aug 2018 Dubai - UAE $4,750 Register
Home » Seminars » Electrical Engineering » Electrical Protection

Introduction

Electrical protection devices are a fundamental and critical aspect of electrical installations. Protection is applied on a component basis. Relays are associated with each major component of the power distribution system to detect various forms of distress associated with those components. If one of those relays operates, which means that an output contact protective devices which then isolates the defective system components. It may be convenient to think of the circuit breaker as the muscle that does the work of isolating the component, while the relay is the brain which decides that isolation is required.

The training seminar will highlight:

  • Operational principles and types of electrical protection
  • Design of different types or relays
  • Protection coordination and architecture
  • Protection for feeders, motors and transformers
  • Short circuit current calculations

Objectives

At the end of the training seminar you will learn to:

  • Appreciate the practical solutions for specifying the correct type of electrical protection
  • Understand comprehensive understanding of principles and selection of relays
  • Develop design of protection schemes
  • Learn the construction and functions of instrument transformers
  • Explain types grounding system and earthing fault protection

Training Methodology

Each training course participant will receive a copy of the comprehensive training course manual. The training is designed to have an interactive format to maximize delegate participation. Questions and answers are encouraged throughout and at the daily sessions. The presenter will discuss specific problems and appropriate solutions. Only minimum note-taking is encouraged to ensure maximum delegate attention during the training course.

Organisational Impact

The training seminar provides an ideal way to cater for technical training of personnel. The benefits for the organisation can be summarised as follows:

  • Technical training and up-skilling to improve and realise the full potential of a competent workforce
  • Productivity increase through minimisation of project time acceptance/design and commissioning
  • Identification for opportunities of improvements due to deep understanding of the presented state-of-the-art technologies
  • Networking of personnel with technology leaders and other engineers and technicians with strong field experience
  • Exposure of personnel to the standard international procedures
  • Attitude change of workforce, as continuous follow up of new technologies and their up taking could otherwise create workforce with high resistance to change due to lack of understanding

Personal Impact

On successful completion of this training course delegates will be able to:

  • To understand the types and reasons of electrical faults
  • To understand the various types of electrical protection devices in an LV and MV electrical system namely fuses, circuit breakers and protection relays
  • To understand the operations and types of protection relays namely the micro logic, solid state and numerical relays
  • To install and select the correct type of relays for specific functions
  • Common protection relays for switchboards, feeders, motors and transformers
  • Types of short circuit currents impact and calculations

Who Should Attend?

Electrical protection is a very important component in all electrical installations. It is imperative that all personnel associated with electrical installation operations and maintenance need to understand the concepts of electrical protection.

This training course is suitable to a wide range of professionals but will greatly benefit:

  • Engineers and Technicians from electricity supply industry
  • Technical Management Professionals and Department Leaders
  • Engineering Professionals from companies manufacturing and operating power and distribution transformers
  • Engineers and Technical Personnel in power utilities, petrochemical plants, service professionals of large infrastructure projects
  • Maintenance and operations technicians

Seminar Outline

DAY 1

Types of Electrical Protection Devices and Faults

  • Protection and Control Devices
  • Types of Electrical Faults
  • Characteristics of Fuses for Electrical Protection
  • Characteristics of Circuit Breakers for Electrical Protection
  • Functions of Electronic Releases
  • Time, Current and Trip Curves
  • Protection Coordination
  • LV Switchboard Protection against Short Circuit

DAY 2

Protection Functions and Instrument Transformers

  • Power System Architecture
  • Protection Functions
  • Discrimination
  • Power System Protection
  • Sensors
  • Current and Voltage Transformers
  • Types of Relays
  • Numerical Relays and Functions

DAY 3

Busbar, Transformer and Motor Protection Systems

  • Busbar Protection
  • Transformer Protection
  • Motor Protection
  • Capacitor Protection
  • Type of Related Faults
  • Relevant Protection Functions
  • Recommended Settings
  • Applications Examples

DAY 4

Grounding Systems and Earth Fault Protection

  • Overcurrent Protection for Phase and Earth Faults
  • Unit Protection Schemes
  • Distance Protection
  • System Integrity Protection Schemes
  • Protection of Feeders against overload and Short Circuit
  • Types of Grounding System
  • Earthing Protection Systems
  • Protection against over Voltages

DAY 5

Methods of Calculating Short Circuit Current and Harmonics

  • Calculation of Short Circuit Current
  • Fault Topologies
  • Short Circuit current at Fault Point
  • Positive, Negative and Zero Sequence Systems
  • Harmonics Effects
  • Harmonics Mitigation Techniques
  • Wrap-up Session
  • Q&A Session

Accreditation

  • Quality Logo

In Association With

Oxford Management Centre

Oxford Management Centre

A GLOMACS - Oxford Management Centre collaboration aimed at providing the best training services and benefits to our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Electrical Engineering » Electrical Protection

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Electrical Protection


Upcoming Dates

Code Date Venue Fees
EL032 19 - 23 Nov 2017 Dubai - UAE $4,500
EL032 12 - 16 Aug 2018 Dubai - UAE $4,750

Introduction

Electrical protection devices are a fundamental and critical aspect of electrical installations. Protection is applied on a component basis. Relays are associated with each major component of the power distribution system to detect various forms of distress associated with those components. If one of those relays operates, which means that an output contact protective devices which then isolates the defective system components. It may be convenient to think of the circuit breaker as the muscle that does the work of isolating the component, while the relay is the brain which decides that isolation is required.

The training seminar will highlight:

  • Operational principles and types of electrical protection
  • Design of different types or relays
  • Protection coordination and architecture
  • Protection for feeders, motors and transformers
  • Short circuit current calculations

Objectives

At the end of the training seminar you will learn to:

  • Appreciate the practical solutions for specifying the correct type of electrical protection
  • Understand comprehensive understanding of principles and selection of relays
  • Develop design of protection schemes
  • Learn the construction and functions of instrument transformers
  • Explain types grounding system and earthing fault protection

Training Methodology

Each training course participant will receive a copy of the comprehensive training course manual. The training is designed to have an interactive format to maximize delegate participation. Questions and answers are encouraged throughout and at the daily sessions. The presenter will discuss specific problems and appropriate solutions. Only minimum note-taking is encouraged to ensure maximum delegate attention during the training course.

Organisational Impact

The training seminar provides an ideal way to cater for technical training of personnel. The benefits for the organisation can be summarised as follows:

  • Technical training and up-skilling to improve and realise the full potential of a competent workforce
  • Productivity increase through minimisation of project time acceptance/design and commissioning
  • Identification for opportunities of improvements due to deep understanding of the presented state-of-the-art technologies
  • Networking of personnel with technology leaders and other engineers and technicians with strong field experience
  • Exposure of personnel to the standard international procedures
  • Attitude change of workforce, as continuous follow up of new technologies and their up taking could otherwise create workforce with high resistance to change due to lack of understanding

Personal Impact

On successful completion of this training course delegates will be able to:

  • To understand the types and reasons of electrical faults
  • To understand the various types of electrical protection devices in an LV and MV electrical system namely fuses, circuit breakers and protection relays
  • To understand the operations and types of protection relays namely the micro logic, solid state and numerical relays
  • To install and select the correct type of relays for specific functions
  • Common protection relays for switchboards, feeders, motors and transformers
  • Types of short circuit currents impact and calculations

Who Should Attend?

Electrical protection is a very important component in all electrical installations. It is imperative that all personnel associated with electrical installation operations and maintenance need to understand the concepts of electrical protection.

This training course is suitable to a wide range of professionals but will greatly benefit:

  • Engineers and Technicians from electricity supply industry
  • Technical Management Professionals and Department Leaders
  • Engineering Professionals from companies manufacturing and operating power and distribution transformers
  • Engineers and Technical Personnel in power utilities, petrochemical plants, service professionals of large infrastructure projects
  • Maintenance and operations technicians

SEMINAR OUTLINE

DAY 1

Types of Electrical Protection Devices and Faults

  • Protection and Control Devices
  • Types of Electrical Faults
  • Characteristics of Fuses for Electrical Protection
  • Characteristics of Circuit Breakers for Electrical Protection
  • Functions of Electronic Releases
  • Time, Current and Trip Curves
  • Protection Coordination
  • LV Switchboard Protection against Short Circuit

DAY 2

Protection Functions and Instrument Transformers

  • Power System Architecture
  • Protection Functions
  • Discrimination
  • Power System Protection
  • Sensors
  • Current and Voltage Transformers
  • Types of Relays
  • Numerical Relays and Functions

DAY 3

Busbar, Transformer and Motor Protection Systems

  • Busbar Protection
  • Transformer Protection
  • Motor Protection
  • Capacitor Protection
  • Type of Related Faults
  • Relevant Protection Functions
  • Recommended Settings
  • Applications Examples

DAY 4

Grounding Systems and Earth Fault Protection

  • Overcurrent Protection for Phase and Earth Faults
  • Unit Protection Schemes
  • Distance Protection
  • System Integrity Protection Schemes
  • Protection of Feeders against overload and Short Circuit
  • Types of Grounding System
  • Earthing Protection Systems
  • Protection against over Voltages

DAY 5

Methods of Calculating Short Circuit Current and Harmonics

  • Calculation of Short Circuit Current
  • Fault Topologies
  • Short Circuit current at Fault Point
  • Positive, Negative and Zero Sequence Systems
  • Harmonics Effects
  • Harmonics Mitigation Techniques
  • Wrap-up Session
  • Q&A Session

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube