Code Date Venue Fees
HS042 17 - 21 Dec 2017 Dubai - UAE $4,500 Register
HS042 05 - 09 Aug 2018 Dubai - UAE $4,750 Register
Home » Seminars » Health, Safety & Environment » OSHA: Occupational Safety & Health Administration Standards

Introduction

The taunt of ‘Production versus Safety’ has been with companies for many years. This barrier must be overcome. The Occupational Safety and Health Administration (OSHA), is one of the world’s leading bodies in setting Health and Safety standards. As such, to be up to date and keenly proactive, these standards should be known and applied. Personnel working within these standards will improve performance and therefore make the company more profitable.

The expectation that personnel will always apply these standards because they are part of the company’s policies and procedures is optimistic. It is necessary from time to time to revisit and examine the standards in in order to both refresh and also to stimulate personnel for greater and more accurate application of the standards. This training seminar will review the major OSHA standards that are applicable to both high hazard plants as well as more general industrial (but widely applicable) standards.

This training seminar will highlight:

  • The OSHA Act
  • OSHA's Safety and Health Program Management Guidelines
  • Process Safety Management of Highly Hazardous Chemicals standard(29 CFR 1910.119)
  • Permit-required confined spaces 19 CFR 1910.146
  • HazCom 2012 (29 CFR 1910.200)

Objectives

  • Understand the basis of the OSHA law
  • Creating a better Safety program
  • Analysing Process Safety management
  • Applying best practice for confined space entry
  • Evaluating chemical hazard controls (HazCom 2012)

At the end of this training seminar, you will learn to:

  • Determine the effectiveness of safety management
  • Support your recommendations for improvement of process safety management
  • Develop safe systems of work for confined space entry
  • Understand the basis of HAZOP studies
  • Explain the need for review of standard operating procedures
  • Analyse management of change

Training Methodology

This training seminar is presented face to face and will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. This includes exercises, syndicate and group discussion, training videos and discussions.

Organisational Impact

The organisation that sends personnel to this training seminar will gain in that the delegates will:

  • Gain increased professionalism
  • Be able to improve their present working systems
  • Accept that team working is of the highest importance
  • Have the capacity to increase profitability

Personal Impact

Employees participating in this training seminar will:

  • Gain an Understanding of the OSHA law
  • Determine the effectiveness of safety management
  • Recognise recommendations for improvement of process safety management
  • Be able to develop safe systems of work for confined space entry
  • Understand the basis of HAZOP studies and Inherently Safer Design

Who Should Attend?

This training seminar is suitable to a wide range of Oil and Gas professionals but will greatly benefit:

  • Process Engineers
  • Maintenance Engineers
  • Team Leaders
  • Shift Managers
  • Health and Safety personnel

Seminar Outline

DAY 1

OSHA Standards and the New Guidelines for Safety Management

  • Introduction
  • The OSHA Act
  • Management leadership
  • Hazard Assessment
  • Training
  • Evaluation
  • Improvement

DAY 2

Process Safety Management 29 CFR 1910.119

  • Learning from Accidents
  • The elements of PSM
  • Introduction to PSM
  • Employee Involvement
  • Process Safety Information
  • Introduction to HAZOP Studies

DAY 3

Process Safety Management 29 CFR 1910.119 continues

  • Operating Procedures and Practices
  • Employee Training
  • Contractors
  • Pre-Start-up safety
  • Mechanical Integrity
  • Managing Change
  • Investigation of Incidents

DAY 4

Process Safety Management 29 CFR 1910.119 continues and Confined Space Entry

  • Emergency Preparedness
  • Audits
  • Non Routine work
  • Work Permits
  • Permit-required confined spaces 19 CFR 1910.146
  • Confined Space

DAY 5

Occupational Health and HazCom 2012

  • Chemical classifications
  • Body uptake
  • Safety Data Sheets
  • Exercise
  • Information and Training of personnel
  • Seminar review

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Health, Safety & Environment » OSHA: Occupational Safety & Health Administration Standards

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



OSHA: Occupational Safety & Health Administration Standards


Upcoming Dates

Code Date Venue Fees
HS042 17 - 21 Dec 2017 Dubai - UAE $4,500
HS042 05 - 09 Aug 2018 Dubai - UAE $4,750

Introduction

The taunt of ‘Production versus Safety’ has been with companies for many years. This barrier must be overcome. The Occupational Safety and Health Administration (OSHA), is one of the world’s leading bodies in setting Health and Safety standards. As such, to be up to date and keenly proactive, these standards should be known and applied. Personnel working within these standards will improve performance and therefore make the company more profitable.

The expectation that personnel will always apply these standards because they are part of the company’s policies and procedures is optimistic. It is necessary from time to time to revisit and examine the standards in in order to both refresh and also to stimulate personnel for greater and more accurate application of the standards. This training seminar will review the major OSHA standards that are applicable to both high hazard plants as well as more general industrial (but widely applicable) standards.

This training seminar will highlight:

  • The OSHA Act
  • OSHA's Safety and Health Program Management Guidelines
  • Process Safety Management of Highly Hazardous Chemicals standard(29 CFR 1910.119)
  • Permit-required confined spaces 19 CFR 1910.146
  • HazCom 2012 (29 CFR 1910.200)

Objectives

  • Understand the basis of the OSHA law
  • Creating a better Safety program
  • Analysing Process Safety management
  • Applying best practice for confined space entry
  • Evaluating chemical hazard controls (HazCom 2012)

At the end of this training seminar, you will learn to:

  • Determine the effectiveness of safety management
  • Support your recommendations for improvement of process safety management
  • Develop safe systems of work for confined space entry
  • Understand the basis of HAZOP studies
  • Explain the need for review of standard operating procedures
  • Analyse management of change

Training Methodology

This training seminar is presented face to face and will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. This includes exercises, syndicate and group discussion, training videos and discussions.

Organisational Impact

The organisation that sends personnel to this training seminar will gain in that the delegates will:

  • Gain increased professionalism
  • Be able to improve their present working systems
  • Accept that team working is of the highest importance
  • Have the capacity to increase profitability

Personal Impact

Employees participating in this training seminar will:

  • Gain an Understanding of the OSHA law
  • Determine the effectiveness of safety management
  • Recognise recommendations for improvement of process safety management
  • Be able to develop safe systems of work for confined space entry
  • Understand the basis of HAZOP studies and Inherently Safer Design

Who Should Attend?

This training seminar is suitable to a wide range of Oil and Gas professionals but will greatly benefit:

  • Process Engineers
  • Maintenance Engineers
  • Team Leaders
  • Shift Managers
  • Health and Safety personnel

SEMINAR OUTLINE

DAY 1

OSHA Standards and the New Guidelines for Safety Management

  • Introduction
  • The OSHA Act
  • Management leadership
  • Hazard Assessment
  • Training
  • Evaluation
  • Improvement

DAY 2

Process Safety Management 29 CFR 1910.119

  • Learning from Accidents
  • The elements of PSM
  • Introduction to PSM
  • Employee Involvement
  • Process Safety Information
  • Introduction to HAZOP Studies

DAY 3

Process Safety Management 29 CFR 1910.119 continues

  • Operating Procedures and Practices
  • Employee Training
  • Contractors
  • Pre-Start-up safety
  • Mechanical Integrity
  • Managing Change
  • Investigation of Incidents

DAY 4

Process Safety Management 29 CFR 1910.119 continues and Confined Space Entry

  • Emergency Preparedness
  • Audits
  • Non Routine work
  • Work Permits
  • Permit-required confined spaces 19 CFR 1910.146
  • Confined Space

DAY 5

Occupational Health and HazCom 2012

  • Chemical classifications
  • Body uptake
  • Safety Data Sheets
  • Exercise
  • Information and Training of personnel
  • Seminar review

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube