Code Date Venue Fees
EL023 16 - 20 Sep 2018 Dubai - UAE $4,750 Register
Home » Seminars » Electrical Engineering » Troubleshooting and Maintenance of Electrical Equipment

Introduction

This GLOMACS Electrical Engineering training seminar focuses mainly on trouble shooting and maintenance of electrical equipment.

Electrical equipment plays an important role in the safe transmission and distribution of electrical power. The equipment needs to be operated in a safe manner securing continuity of supply to consumers.

This requires the equipment to be: 

  • Operated, and maintained in a safe  manner
  • Controlled and within an effective management system
  • Aware of the need of maintenance and troubleshooting techniques balanced against equipment downtime.

Objectives

This training course is designed to increase the awareness of the required diagnostic skills of engineers and maintenance teams on Modern Power systems. The training course will revolve around maintenance, troubleshooting and fault finding techniques used in today's modern systems.

At the end of this training course, you will learn to:

  • Elaborate on a variety of Electrical faults
  • Discuss Electrical fault finding procedures
  • Examine Maintenance and condition monitoring
  • Describe the function of a Transformer
  • Describe the need for an efficient Earthing system
  • Interpret Cabling systems and fault-finding techniques

Training Methodology

In this Electrical Engineering training seminar, goals of each participant are discussed to ensure their needs are fulfilled, as far as possible. Formal delivery, group work, short videos and case studies are used throughout the week. Questions are encouraged throughout, particularly at the daily wrap-up sessions. This provides opportunities for participants to discuss specific issues and, if possible, find appropriate solutions. General discussions are employed to highlight particular points and to illustrate particular conditions.

Organisational Impact

The training seminar will allow delegates to interact and gain shared experiences of others along with:

  • Understand the legal requirements for Electrical maintenance
  • An understanding for the need for routine maintenance and a logical approach to fault finding techniques
  • Develop new skills when implementing maintenance techniques
  • Analyse current competence in Maintenance and Fault-finding and yourself to fill ‘gaps’ of current knowledge
  • Develop skills and knowledge to implement condition based maintenance and non-invasive maintenance, which will assist in reducing down-time and shut-down of equipment

Personal Impact

On successful completion of this training programme, delegates will be able to understand:

  • The need for routine inspection, adequate maintenance of equipment and accurate record keeping
  • Safe methods of maintenance management
  • The effective maintenance activities for best utilisation of time and resources
  • Electrical equipment and systems maintenance requirements
  • The requirements for a logical process in fault finding and troubleshooting

Who Should Attend?

This training programme is suitable to a wide range of professionals but will greatly benefit:

  • Electrical Professionals
  • Electrical Engineers
  • Electrical Supervisors
  • Technicians
  • Professionals responsible for the operation, maintenance and fault finding techniques
  • Personnel who have a work scope which includes limited Electrical maintenance

Seminar Outline

DAY 1

Introductions and Safety

  • Pre-course assessment
  • Goals and discussion
  • Types of fault and factors affecting fault levels
  • Maintenance of electrical equipment
  • Managing maintenance
  • Safety
  • Balanced and unbalanced faults
  • Safe working practices
  • Safe isolation procedure’s

DAY 2

Maintenance of Electrical Equipment

  • Review of Day 1
  • Electrical systems and components
  • Fault identification
  • Circuit breakers and capacities
  • Earthing introduction
  • Network earthing
  • Earthing systems
  • Earth bonding

DAY 3

Maintenance Engineering

  • Review of Day 2
  • Predictive Maintenance
  • Preventative Maintenance
  • Reactive Maintenance and Troubleshooting
  • Condition monitoring
  • Electrical Testing for Troubleshooting
  • Transformer maintenance
  • Generator maintenance

 DAY 4

Electrical Equipment: Troubleshooting and Maintenance

  • Review of Day 3
  • Transformer components and trouble shooting
  • Maintenance of electric motors
  • Power electronics and Pulse width modulation invertors
  • AC Machine components and problem solving
  • Synchronous Generators
  • Generator maintenance and trouble shooting
  • Variable speed drives

DAY 5

Cabling

  • Review of Day 4
  • Cable fault locating
  • External influences
  • Compatibility of equipment
  • SCADA (supervisory control and data acquisition)
  • Post course assessment

Accreditation

  • Quality Logo

You may also be Interested in...

Home » Seminars » Electrical Engineering » Troubleshooting and Maintenance of Electrical Equipment

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Troubleshooting and Maintenance of Electrical Equipment


Upcoming Dates

Code Date Venue Fees
EL023 16 - 20 Sep 2018 Dubai - UAE $4,750

Introduction

This GLOMACS Electrical Engineering training seminar focuses mainly on trouble shooting and maintenance of electrical equipment.

Electrical equipment plays an important role in the safe transmission and distribution of electrical power. The equipment needs to be operated in a safe manner securing continuity of supply to consumers.

This requires the equipment to be: 

  • Operated, and maintained in a safe  manner
  • Controlled and within an effective management system
  • Aware of the need of maintenance and troubleshooting techniques balanced against equipment downtime.

Objectives

This training course is designed to increase the awareness of the required diagnostic skills of engineers and maintenance teams on Modern Power systems. The training course will revolve around maintenance, troubleshooting and fault finding techniques used in today's modern systems.

At the end of this training course, you will learn to:

  • Elaborate on a variety of Electrical faults
  • Discuss Electrical fault finding procedures
  • Examine Maintenance and condition monitoring
  • Describe the function of a Transformer
  • Describe the need for an efficient Earthing system
  • Interpret Cabling systems and fault-finding techniques

Training Methodology

In this Electrical Engineering training seminar, goals of each participant are discussed to ensure their needs are fulfilled, as far as possible. Formal delivery, group work, short videos and case studies are used throughout the week. Questions are encouraged throughout, particularly at the daily wrap-up sessions. This provides opportunities for participants to discuss specific issues and, if possible, find appropriate solutions. General discussions are employed to highlight particular points and to illustrate particular conditions.

Organisational Impact

The training seminar will allow delegates to interact and gain shared experiences of others along with:

  • Understand the legal requirements for Electrical maintenance
  • An understanding for the need for routine maintenance and a logical approach to fault finding techniques
  • Develop new skills when implementing maintenance techniques
  • Analyse current competence in Maintenance and Fault-finding and yourself to fill ‘gaps’ of current knowledge
  • Develop skills and knowledge to implement condition based maintenance and non-invasive maintenance, which will assist in reducing down-time and shut-down of equipment

Personal Impact

On successful completion of this training programme, delegates will be able to understand:

  • The need for routine inspection, adequate maintenance of equipment and accurate record keeping
  • Safe methods of maintenance management
  • The effective maintenance activities for best utilisation of time and resources
  • Electrical equipment and systems maintenance requirements
  • The requirements for a logical process in fault finding and troubleshooting

Who Should Attend?

This training programme is suitable to a wide range of professionals but will greatly benefit:

  • Electrical Professionals
  • Electrical Engineers
  • Electrical Supervisors
  • Technicians
  • Professionals responsible for the operation, maintenance and fault finding techniques
  • Personnel who have a work scope which includes limited Electrical maintenance

SEMINAR OUTLINE

DAY 1

Introductions and Safety

  • Pre-course assessment
  • Goals and discussion
  • Types of fault and factors affecting fault levels
  • Maintenance of electrical equipment
  • Managing maintenance
  • Safety
  • Balanced and unbalanced faults
  • Safe working practices
  • Safe isolation procedure’s

DAY 2

Maintenance of Electrical Equipment

  • Review of Day 1
  • Electrical systems and components
  • Fault identification
  • Circuit breakers and capacities
  • Earthing introduction
  • Network earthing
  • Earthing systems
  • Earth bonding

DAY 3

Maintenance Engineering

  • Review of Day 2
  • Predictive Maintenance
  • Preventative Maintenance
  • Reactive Maintenance and Troubleshooting
  • Condition monitoring
  • Electrical Testing for Troubleshooting
  • Transformer maintenance
  • Generator maintenance

 DAY 4

Electrical Equipment: Troubleshooting and Maintenance

  • Review of Day 3
  • Transformer components and trouble shooting
  • Maintenance of electric motors
  • Power electronics and Pulse width modulation invertors
  • AC Machine components and problem solving
  • Synchronous Generators
  • Generator maintenance and trouble shooting
  • Variable speed drives

DAY 5

Cabling

  • Review of Day 4
  • Cable fault locating
  • External influences
  • Compatibility of equipment
  • SCADA (supervisory control and data acquisition)
  • Post course assessment

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube