Share This
Home » Seminars » Instrumentation & Process Control » Safety Instrumentation and Emergency Shut-down Systems

Safety Instrumentation and
Emergency Shut-down Systems

Best Practices using IEC 61508 & IEC 61511

Safety Instrumentation and Emergency Shut-down Systems

Best Practices using IEC 61508 & IEC 61511

Code Date Venue Fees
IN010 10 - 14 Dec 2017 Dubai - UAE $4,500 Register

Introduction

Functional process safety involves identifying potential hazardous events that can trigger a chain reaction that could lead to serious or catastrophic consequences. This seminar explains the requirements of the international standards IEC 61508 and IEC 61511, for functional safety instrumented system and, covers the entire life-cycle of safety instrumented systems, from determining what risk control systems are required through to decommissioning.  This also includes the separation of basic process control systems and safety instrumented systems (SIS), layers independent protection (LOPs), how to determine safety integrity levels (SILs), technology choices and field device issues.

The seminar primarily focuses on establishing conceptual and detailed design requirements, hazard analysis techniques, safety requirements specification, and the commissioning, operating and maintenance procedures.

 This seminar will highlight:

  • Hazard and risk reduction studies
  • explaining technology an equipment choices
  • Safety requirement specifications for an SIS
  • Selection of field devices (sensors, programmable logic controllers and valves)
  • Establishing operation and maintenance procedures

Objectives

The objectives of this seminar is to acquaint instrumentation and control system engineers with the essentials of the IEC 61508 and IEC 61511 safety instrumented systems standards and, how they relate to the safety life cycle of developing and maintaining safety instrumented systems. The fundamental tools will enable delegates to evaluate, design, install and maintain safety instrumented systems (SISs) and to determine their safety integrity level (SILs) requirements.

 At the end of this seminar, you will learn to:

  • Understand requirements of the international standards IEC 61598 and IEC 61511
  • Apply the IEC 61508 safety instrumented system development ‘Safety Life Cycle’ model
  • Determine the safety integrity level (SIL) level using risk assessment methods
  • Understand the specifications of emergency shutdown protection requirements
  • Establish specification requirements for sensor, programmable logic controller and valves
  • Follow management of change (MOC) procedures for control of future SIS changes

Training Methodology

The seminar uses a range of approaches for learning, including group activities, exercises and case studies. Key part of the learning process is sharing of experiences and knowledge. Throughout the seminar, delegates will learn through active participation using exercises and case studies.

Organisational Impact

In addition to the professional development of staff, the organisation will be able to prioritise resources for developing and managing safety instrumentation system projects, including:

  • Implementing safety instrumented systems that optimises production and safety.
  • Use well proven risk assessment and analysis for competent SIS development
  • More effective implementation in upgrading existing emergency shutdown controls
  • Improved confidence in the prevention of hazardous incidents

Personal Impact

Attendees will be able to apply skills learnt from this training at a practical level to identify, develop and implement safety instrumented systems.

  • Delegates will gain skills to be able select technology choices that meets IEC 61508/61511.
  • By using these skills you can competently implement the SIS safety life cycle.

Who Should Attend?

This seminar is specifically tailored for anyone involved in the field of emergency shutdown and safety related instrumentation systems according to IEC 61508 and IEC 61511 requirements

  • Personnel who are responsible for the designing, selecting, specifying, installing, operating and maintaining safety instrumentation systems
  • Experienced professionals who want to broaden their understanding of safety instrumentation systems (SIS)

This seminar is suitable to a wide range of professional but will greatly benefit:

  • Design and Electrical Engineers
  • Instrument and Process Control Engineers and Technicians
  • Mechanical Engineers and Technicians
  • Operations and Process Engineers
  • Line Managers and Supervisors

SEMINAR OUTLINE

DAY 1

Introduction to Safety Instrumentation Systems

  • Overview of safety instrument functions (SIFs)
  • Introduction to standards IEC 61508 and IEC 61511
  • Equipment under control (EUC)
  • Introduction in identifying hazards and analysing risks
  • Safety instrumented systems (SIS) - Safety Life Cycle stages
  • Overview of Safety Integrity Levels (SILs)

 

DAY 2

Hazards & Risk Reduction

  • Identifying hazards and risk analysis tools
  • Process control vs. safety control
  • Layers of Protection models (LOPs)
  • Risk reduction and risk ranking classification
  • Determining Safety Integrity Levels (SILs)
  • Developing the Safety Requirements Specification

 

DAY 3

Technology Choices and Reliability Analysis

  • IEC 61508/IEC 61511 technology requirements)
  • Pneumatic systems
  • Relay systems and solid-state systems
  • Microprocessor/PLC systems
  • issues related to system size and complexity
  • Reliability of components databases

 

DAY 4

Overview of SIS Field Devices

  • Importance of field devices
  • Types of sensors
  • Final elements (pressure relief and shutdown valves)
  • Nuisance trips, voting schemes and redundancy
  • Design requirements for field devices
  • Installation of field device concerns

 

DAY 5

Safety Systems Engineering

  • Step-by-Step safety instrumentation system development plan
  • SIS functional testing procedures
  • Information flow and preparation of documents
  • Managing existing and future changes to an SIS
  • Review of an SIS design checklist
  • Close of course

 

Accreditation

  • Quality Logo



Safety Instrumentation and
Emergency Shut-down Systems

Best Practices using IEC 61508 & IEC 61511


Upcoming Dates

Code Date Venue Fees
IN010 10 - 14 Dec 2017 Dubai - UAE $4,500

Introduction

Functional process safety involves identifying potential hazardous events that can trigger a chain reaction that could lead to serious or catastrophic consequences. This seminar explains the requirements of the international standards IEC 61508 and IEC 61511, for functional safety instrumented system and, covers the entire life-cycle of safety instrumented systems, from determining what risk control systems are required through to decommissioning.  This also includes the separation of basic process control systems and safety instrumented systems (SIS), layers independent protection (LOPs), how to determine safety integrity levels (SILs), technology choices and field device issues.

The seminar primarily focuses on establishing conceptual and detailed design requirements, hazard analysis techniques, safety requirements specification, and the commissioning, operating and maintenance procedures.

 This seminar will highlight:

  • Hazard and risk reduction studies
  • explaining technology an equipment choices
  • Safety requirement specifications for an SIS
  • Selection of field devices (sensors, programmable logic controllers and valves)
  • Establishing operation and maintenance procedures

Objectives

The objectives of this seminar is to acquaint instrumentation and control system engineers with the essentials of the IEC 61508 and IEC 61511 safety instrumented systems standards and, how they relate to the safety life cycle of developing and maintaining safety instrumented systems. The fundamental tools will enable delegates to evaluate, design, install and maintain safety instrumented systems (SISs) and to determine their safety integrity level (SILs) requirements.

 At the end of this seminar, you will learn to:

  • Understand requirements of the international standards IEC 61598 and IEC 61511
  • Apply the IEC 61508 safety instrumented system development ‘Safety Life Cycle’ model
  • Determine the safety integrity level (SIL) level using risk assessment methods
  • Understand the specifications of emergency shutdown protection requirements
  • Establish specification requirements for sensor, programmable logic controller and valves
  • Follow management of change (MOC) procedures for control of future SIS changes

Training Methodology

The seminar uses a range of approaches for learning, including group activities, exercises and case studies. Key part of the learning process is sharing of experiences and knowledge. Throughout the seminar, delegates will learn through active participation using exercises and case studies.

Organisational Impact

In addition to the professional development of staff, the organisation will be able to prioritise resources for developing and managing safety instrumentation system projects, including:

  • Implementing safety instrumented systems that optimises production and safety.
  • Use well proven risk assessment and analysis for competent SIS development
  • More effective implementation in upgrading existing emergency shutdown controls
  • Improved confidence in the prevention of hazardous incidents

Personal Impact

Attendees will be able to apply skills learnt from this training at a practical level to identify, develop and implement safety instrumented systems.

  • Delegates will gain skills to be able select technology choices that meets IEC 61508/61511.
  • By using these skills you can competently implement the SIS safety life cycle.

Who Should Attend?

This seminar is specifically tailored for anyone involved in the field of emergency shutdown and safety related instrumentation systems according to IEC 61508 and IEC 61511 requirements

  • Personnel who are responsible for the designing, selecting, specifying, installing, operating and maintaining safety instrumentation systems
  • Experienced professionals who want to broaden their understanding of safety instrumentation systems (SIS)

This seminar is suitable to a wide range of professional but will greatly benefit:

  • Design and Electrical Engineers
  • Instrument and Process Control Engineers and Technicians
  • Mechanical Engineers and Technicians
  • Operations and Process Engineers
  • Line Managers and Supervisors

SEMINAR OUTLINE

DAY 1

Introduction to Safety Instrumentation Systems

  • Overview of safety instrument functions (SIFs)
  • Introduction to standards IEC 61508 and IEC 61511
  • Equipment under control (EUC)
  • Introduction in identifying hazards and analysing risks
  • Safety instrumented systems (SIS) - Safety Life Cycle stages
  • Overview of Safety Integrity Levels (SILs)

 

DAY 2

Hazards & Risk Reduction

  • Identifying hazards and risk analysis tools
  • Process control vs. safety control
  • Layers of Protection models (LOPs)
  • Risk reduction and risk ranking classification
  • Determining Safety Integrity Levels (SILs)
  • Developing the Safety Requirements Specification

 

DAY 3

Technology Choices and Reliability Analysis

  • IEC 61508/IEC 61511 technology requirements)
  • Pneumatic systems
  • Relay systems and solid-state systems
  • Microprocessor/PLC systems
  • issues related to system size and complexity
  • Reliability of components databases

 

DAY 4

Overview of SIS Field Devices

  • Importance of field devices
  • Types of sensors
  • Final elements (pressure relief and shutdown valves)
  • Nuisance trips, voting schemes and redundancy
  • Design requirements for field devices
  • Installation of field device concerns

 

DAY 5

Safety Systems Engineering

  • Step-by-Step safety instrumentation system development plan
  • SIS functional testing procedures
  • Information flow and preparation of documents
  • Managing existing and future changes to an SIS
  • Review of an SIS design checklist
  • Close of course

 


Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae


© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download Training Calendar


Trusted by

ABDUL LATIF
ADCO
ADDAX
ADDC
ADIA
ADMA
AL KHAFJI
CHEVRON
CMA
LLOYD REGISTER
MARIF
MOBILY
OMIFCO
PDO
PETRO RABIGH
Qatar Foundation
qatargas
RasGas
Riyad Bank
SAUDI FOOD & DRUG
SHELL
STC
TADAWUL
TOTAL
TRANSCO
BAPCO
Qatar Petroleum

View all Clients

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube