Code Date Venue Fees
OG051 19 - 23 Nov 2017 Dubai - UAE $4,500 Register
OG051 25 - 29 Nov 2018 Dubai - UAE $4,750 Register
Home » Seminars » Oil & Gas Technology » SIPROD (Simultaneous Drilling and Production) for Offshore Platforms

Introduction

SIPROD (Simultaneous Production and Drilling) is performing simultaneous activities of production and drilling at one phase and one location. When drilling and production activities are combined, the resultant magnitude of risk to personal and property is generally perceived to be high enough to discourage simultaneous drilling and production. In certain circumstances, however, it may be financially attractive to maintain production while drilling, thus avoiding the potential loss or delay of production.

In order to enter in to a SIPROD mode campaign, specific design modifications has to be carried out on the Drilling Platform and the Production Platform or any other adjoining platforms to accommodate the rig and to ensure that production and safety systems are upgraded to cater for the increased risks due to the simultaneous activities.

This training seminar will feature:

  • SIPROD Philosophy and what are needed for the SIPROD Preparation Package
  • Understanding what the rig-up package comprises
  • The concept of Well-tie in package and what it comprises
  • The concept of Rig down package
  • Understanding what the Reinstatement package is and what it comprises
  • Understanding and grasping the limits of SIPROD boundaries

Objectives

By the end of this training seminar, participants will be able to:

  • Understand what is SIPROD Philosophy and what are needed for the SIPROD Preparation package
  • Understand the complexities of rig-up packages
  • Understand Well tie-in packages and what it comprises
  • Fully understand the concept of Rig down package
  • Understand what is involved in Reinstatement packages
  • Fully understand the scope of SIPROD and its boundaries

Training Methodology

This seminar is conducted in a classroom. Examples and video clips of past offshore SIPROD for Offshore facilities will be used to aid the learning and understanding of the subject matters. Participants will also take part in group classroom exercises to reinforce their learning experience. Each participant will receive a set of seminar materials. There will also be pre-seminar as well as post-seminar assessment tests.

Who Should Attend?

This training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Asset Managers
  • Field Engineers
  • Operations engineers
  • Production Engineers
  • Drilling Engineers
  • Project Engineers & Managers
  • Construction Managers & Supervisors
  • Workpack Engineers
  • Structural Engineers
  • Metocean Engineers
  • Pipeline Discipline Engineers
  • Subsea Equipment Engineers
  • Maintenance Engineers
  • Contract Administrators, Buyers and Procurement Executives
  • Cost Estimating, Project Control and Planning Engineers
  • Diving and Diving Support Personnel

Seminar Outline

DAY 1

  • Introduction to the SIPROD course
  • Pre-course assessment test
  • Identify and set the expectations of the course participants
  • Learning objectives of the SIPROD course
  • Definitions, abbreviations
  • Typical project documentations, codes and standards
  • Introduction to a case study
  • Scope of SIPROD
  • Pre-course assessment test

  • Course learning objectives vs course participants’ expectations

DAY 2

  • Case study deliverables – Class Exercise 1
  • System Design for SIPROD 1
  • Depressurisation of systems
  • Shutdown systems – USD, PSD, ESD
  • Shutdown cause and effects
  • Instrument Air Systems

DAY 3

  • Case study deliverables – Class Exercise 2
  • System Design for SIPROD 2
  • Isolation of sumps
  • Hazardous area classification
  • ESD push-buttons at driller’s console
  • Kill Knob at SIPROD Alarm Panel

DAY 4

  • Case study deliverables – Class Exercise 3
  • System Design for SIPROD 3
  • Fire water mains
  • Escape routes
  • Well unloading with temporary system and burner
  • Deliverables for SIMPOS for Structural & Safety disciplines

DAY 5

  • Case study deliverables – Class Exercise 4
  • Instrument systems
  • Hook-up and Commissioning
  • Process and Piping systems
  • Process and Instrumentation
  • Post-course assessment test

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

You may also be Interested in...

Home » Seminars » Oil & Gas Technology » SIPROD (Simultaneous Drilling and Production) for Offshore Platforms

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



SIPROD (Simultaneous Drilling and Production) for Offshore Platforms


Upcoming Dates

Code Date Venue Fees
OG051 19 - 23 Nov 2017 Dubai - UAE $4,500
OG051 25 - 29 Nov 2018 Dubai - UAE $4,750

Introduction

SIPROD (Simultaneous Production and Drilling) is performing simultaneous activities of production and drilling at one phase and one location. When drilling and production activities are combined, the resultant magnitude of risk to personal and property is generally perceived to be high enough to discourage simultaneous drilling and production. In certain circumstances, however, it may be financially attractive to maintain production while drilling, thus avoiding the potential loss or delay of production.

In order to enter in to a SIPROD mode campaign, specific design modifications has to be carried out on the Drilling Platform and the Production Platform or any other adjoining platforms to accommodate the rig and to ensure that production and safety systems are upgraded to cater for the increased risks due to the simultaneous activities.

This training seminar will feature:

  • SIPROD Philosophy and what are needed for the SIPROD Preparation Package
  • Understanding what the rig-up package comprises
  • The concept of Well-tie in package and what it comprises
  • The concept of Rig down package
  • Understanding what the Reinstatement package is and what it comprises
  • Understanding and grasping the limits of SIPROD boundaries

Objectives

By the end of this training seminar, participants will be able to:

  • Understand what is SIPROD Philosophy and what are needed for the SIPROD Preparation package
  • Understand the complexities of rig-up packages
  • Understand Well tie-in packages and what it comprises
  • Fully understand the concept of Rig down package
  • Understand what is involved in Reinstatement packages
  • Fully understand the scope of SIPROD and its boundaries

Training Methodology

This seminar is conducted in a classroom. Examples and video clips of past offshore SIPROD for Offshore facilities will be used to aid the learning and understanding of the subject matters. Participants will also take part in group classroom exercises to reinforce their learning experience. Each participant will receive a set of seminar materials. There will also be pre-seminar as well as post-seminar assessment tests.

Who Should Attend?

This training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Asset Managers
  • Field Engineers
  • Operations engineers
  • Production Engineers
  • Drilling Engineers
  • Project Engineers & Managers
  • Construction Managers & Supervisors
  • Workpack Engineers
  • Structural Engineers
  • Metocean Engineers
  • Pipeline Discipline Engineers
  • Subsea Equipment Engineers
  • Maintenance Engineers
  • Contract Administrators, Buyers and Procurement Executives
  • Cost Estimating, Project Control and Planning Engineers
  • Diving and Diving Support Personnel

SEMINAR OUTLINE

DAY 1

  • Introduction to the SIPROD course
  • Pre-course assessment test
  • Identify and set the expectations of the course participants
  • Learning objectives of the SIPROD course
  • Definitions, abbreviations
  • Typical project documentations, codes and standards
  • Introduction to a case study
  • Scope of SIPROD
  • Pre-course assessment test

  • Course learning objectives vs course participants’ expectations

DAY 2

  • Case study deliverables – Class Exercise 1
  • System Design for SIPROD 1
  • Depressurisation of systems
  • Shutdown systems – USD, PSD, ESD
  • Shutdown cause and effects
  • Instrument Air Systems

DAY 3

  • Case study deliverables – Class Exercise 2
  • System Design for SIPROD 2
  • Isolation of sumps
  • Hazardous area classification
  • ESD push-buttons at driller’s console
  • Kill Knob at SIPROD Alarm Panel

DAY 4

  • Case study deliverables – Class Exercise 3
  • System Design for SIPROD 3
  • Fire water mains
  • Escape routes
  • Well unloading with temporary system and burner
  • Deliverables for SIMPOS for Structural & Safety disciplines

DAY 5

  • Case study deliverables – Class Exercise 4
  • Instrument systems
  • Hook-up and Commissioning
  • Process and Piping systems
  • Process and Instrumentation
  • Post-course assessment test

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube