Code Date Venue Fees
OG050 23 - 27 Jul 2017 Dubai - UAE $4,500 Register
Home » Seminars » Oil & Gas Technology » Topside / Jacket Fabrication Works in Major Shipyards

Introduction

Fabrication and Load-out are two critical phases of any offshore development projects before the sail-away and offshore installation happens. This seminar aims to provide the participants with a comprehensive overview of Upstream Project Engineering, Fabrication, Erection, Assembly, Lifting, Load-out and Sea-Transportation.

With a good understanding of fabrication, load-out and transportation, the participants will be better prepared to function in the fabrication and construction department, as field and discipline engineers, project engineer, cost estimating engineers, fabrication contract admin executives, CSR, Construction supervisors, or fabrication planning engineer.

This training seminar will feature:

  • Overview of field development planning (FDP) and project management
  • Fabrication shop engineering and drawings
  • Fabrication techniques
  • Cutting and welding
  • Blasting and painting
  • Erection and assembly techniques
  • Cranes and lifting techniques
  • Load-out techniques, preparations and ballasting
  • Sea-fastening engineering and implementation
  • Overview of offshore transportation and marine vessels
  • Post-fabrication activities

Objectives

By the end of this training seminar, participants will be able to:

  • Understand what entails in field development planning (FDP) and project management
  • Understand how the fabrication shop drawings are generated in the fabrication yards
  • Understand fabrication, cutting and welding, blasting and painting, erection and assembly techniques in the fabrication yards
  • Understand the cranes and lifting techniques
  • Understand Erection, Loadout techniques and sea-fastening implementation at Fabrication yards
  • Understand the selection of the major support marine vessels and major installation equipment for offshore installation works
  • Fully understand the structure and topsides installation techniques
  • Fully understand what are involved in mobilisation of marine vessels, construction crew, marine crew and construction equipment

Training Methodology

Relevant international and typical client engineering standards will be referred to during the seminar. Basic engineering formulas and calculations, flowcharts and diagrams will be used to illustrate the principles and steps required for each part of the work. Real-life project examples as well as video clips will be used to demonstrate the fabrication and load-out techniques and to aid the familiarisation and learning of the participants.

Who Should Attend?

This training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Field Engineers
  • Construction Supervisors
  • Project Engineers
  • Operations Engineers
  • Workpack Engineers
  • Structural Engineers
  • Metocean Engineers
  • Pipeline Discipline Engineers
  • Subsea Equipment Engineers
  • Various Discipline Engineers (structural, piping, equipment, electrical, instrumentation)
  • Maintenance Engineers
  • Contract Administrators, Buyers and Procurement Executives
  • Cost Estimating, Project Control and Planning Engineers
  • Managers and executives who are new to fabrication works of Topsides and Jacket fabrication works in shipyards
  • Other Engineers and technicians who need to update their current Oil and Gas industry experience and wanting to move to Offshore Field development Projects

Seminar Outline

DAY 1

Introduction to Topsides and Jacket Fabrication Works in Major Shipyards

  • Introduction to the fabrication of Topsides and Jacket fabrication Works
  • Pre-course assessment test
  • Identify and set the expectations of the course participants
  • Learning objectives of the fabrication course
  • Overview of Field Development Planning (FDP)
  • Project Management team (PMT), roles & responsibilities
  • Contracting, subcontracting and Procurement activities
  • Fabrication yard layout, load-out methods, workshops and major equipment types
  • Fabrication loading considerations, foundation preparation and preliminary works

DAY 2

Work Involved in Fabrication Phase

  • Fabrication Engineering and Calculations
  • Planning and scheduling
  • Fabrication cost-time-resource (CTR) estimating
  • Fabrication, erection and assembly of major structures, substructures
  • Pipeline procurement, concrete coatings, pipeline load out and transportation

DAY 3

Fabrication Works at the Yards for Topside and Jacket Structures

  • Blasting and painting activities
  • Fabrication, erection and assembly of topsides and living quarters modules
  • Typical manpower and fabrication equipment planning and management
  • Skid and Package Equipment
  • Procurement,
  • Factory Acceptance Testing,
  • Delivery, storage and preservation ,
  • Installation, site-testing and acceptance
  • Yard Pre-commissioning activities

DAY 4

Fabrication of Jacket Structures, Transportation and Loadout

  • QA/QC in Fabrication
  • HSE in Fabrication
  • Weight control and weighing of structures in fabrication
  • Jacket commissioning, trial fitting and ship loose items management
  • Testing, inspection, NDT, repairs
  • Welding and welder qualifications
  • Pile and conductors
  • Make-up and fabrication
  • Transportation arrangement consideration and load out

DAY 5

Load-out Planning / Execution / Insurances

  • Load-out planning, engineering for substructures and topside
  • Load out execution, ballasting techniques and calculation
  • Insurances, commercial and warranty surveys
  • Post-project activities and learning
  • Post-course assessment test

Accreditation

  • Quality Logo

In Association With

PetroKnowledge

PetroKnowledge

Our collaboration with Petroknowledge aims to provide the best training services and benefits for our valued clients

Visit website

Related Courses & Seminars

Share this Seminar

Home » Seminars » Oil & Gas Technology » Topside / Jacket Fabrication Works in Major Shipyards

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

DMCA.com Protection Status

Send to Colleague

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.





Sending your message. Please wait...

Send Successfully

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Print Page

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

Close

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.

Download PDF

© 2017. Material published by GLOMACS shown here is copyrighted.

All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.






Sending your message. Please wait...

There was a problem sending your message. Please try again.

Please complete all the fields in the form before sending.



Topside / Jacket Fabrication Works
in Major Shipyards


Upcoming Dates

Code Date Venue Fees
OG050 23 - 27 Jul 2017 Dubai - UAE $4,500

Introduction

Fabrication and Load-out are two critical phases of any offshore development projects before the sail-away and offshore installation happens. This seminar aims to provide the participants with a comprehensive overview of Upstream Project Engineering, Fabrication, Erection, Assembly, Lifting, Load-out and Sea-Transportation.

With a good understanding of fabrication, load-out and transportation, the participants will be better prepared to function in the fabrication and construction department, as field and discipline engineers, project engineer, cost estimating engineers, fabrication contract admin executives, CSR, Construction supervisors, or fabrication planning engineer.

This training seminar will feature:

  • Overview of field development planning (FDP) and project management
  • Fabrication shop engineering and drawings
  • Fabrication techniques
  • Cutting and welding
  • Blasting and painting
  • Erection and assembly techniques
  • Cranes and lifting techniques
  • Load-out techniques, preparations and ballasting
  • Sea-fastening engineering and implementation
  • Overview of offshore transportation and marine vessels
  • Post-fabrication activities

Objectives

By the end of this training seminar, participants will be able to:

  • Understand what entails in field development planning (FDP) and project management
  • Understand how the fabrication shop drawings are generated in the fabrication yards
  • Understand fabrication, cutting and welding, blasting and painting, erection and assembly techniques in the fabrication yards
  • Understand the cranes and lifting techniques
  • Understand Erection, Loadout techniques and sea-fastening implementation at Fabrication yards
  • Understand the selection of the major support marine vessels and major installation equipment for offshore installation works
  • Fully understand the structure and topsides installation techniques
  • Fully understand what are involved in mobilisation of marine vessels, construction crew, marine crew and construction equipment

Training Methodology

Relevant international and typical client engineering standards will be referred to during the seminar. Basic engineering formulas and calculations, flowcharts and diagrams will be used to illustrate the principles and steps required for each part of the work. Real-life project examples as well as video clips will be used to demonstrate the fabrication and load-out techniques and to aid the familiarisation and learning of the participants.

Who Should Attend?

This training seminar is suitable to a wide range of professionals but will greatly benefit:

  • Field Engineers
  • Construction Supervisors
  • Project Engineers
  • Operations Engineers
  • Workpack Engineers
  • Structural Engineers
  • Metocean Engineers
  • Pipeline Discipline Engineers
  • Subsea Equipment Engineers
  • Various Discipline Engineers (structural, piping, equipment, electrical, instrumentation)
  • Maintenance Engineers
  • Contract Administrators, Buyers and Procurement Executives
  • Cost Estimating, Project Control and Planning Engineers
  • Managers and executives who are new to fabrication works of Topsides and Jacket fabrication works in shipyards
  • Other Engineers and technicians who need to update their current Oil and Gas industry experience and wanting to move to Offshore Field development Projects

SEMINAR OUTLINE

DAY 1

Introduction to Topsides and Jacket Fabrication Works in Major Shipyards

  • Introduction to the fabrication of Topsides and Jacket fabrication Works
  • Pre-course assessment test
  • Identify and set the expectations of the course participants
  • Learning objectives of the fabrication course
  • Overview of Field Development Planning (FDP)
  • Project Management team (PMT), roles & responsibilities
  • Contracting, subcontracting and Procurement activities
  • Fabrication yard layout, load-out methods, workshops and major equipment types
  • Fabrication loading considerations, foundation preparation and preliminary works

DAY 2

Work Involved in Fabrication Phase

  • Fabrication Engineering and Calculations
  • Planning and scheduling
  • Fabrication cost-time-resource (CTR) estimating
  • Fabrication, erection and assembly of major structures, substructures
  • Pipeline procurement, concrete coatings, pipeline load out and transportation

DAY 3

Fabrication Works at the Yards for Topside and Jacket Structures

  • Blasting and painting activities
  • Fabrication, erection and assembly of topsides and living quarters modules
  • Typical manpower and fabrication equipment planning and management
  • Skid and Package Equipment
  • Procurement,
  • Factory Acceptance Testing,
  • Delivery, storage and preservation ,
  • Installation, site-testing and acceptance
  • Yard Pre-commissioning activities

DAY 4

Fabrication of Jacket Structures, Transportation and Loadout

  • QA/QC in Fabrication
  • HSE in Fabrication
  • Weight control and weighing of structures in fabrication
  • Jacket commissioning, trial fitting and ship loose items management
  • Testing, inspection, NDT, repairs
  • Welding and welder qualifications
  • Pile and conductors
  • Make-up and fabrication
  • Transportation arrangement consideration and load out

DAY 5

Load-out Planning / Execution / Insurances

  • Load-out planning, engineering for substructures and topside
  • Load out execution, ballasting techniques and calculation
  • Insurances, commercial and warranty surveys
  • Post-project activities and learning
  • Post-course assessment test

Quality Logo

GLOMACS is registered with NASBA as a sponsor of Continuing Professional Education (CPE) on the National Registry of CPE Sponsors. NASBA have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.learningmarket.org.

 

All Training Seminars delivered by GLOMACS by default are eligible for CPE Credit.



© 2017. Material published by GLOMACS shown here is copyrighted.
All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

Print Logo
P.O. Box 74653, Dubai, United Arab Emirates
Tel : +971 - 04 - 425 0700, Fax : +971 (04) 425 0701, Email : info@glomacs.ae

Download Training Calendar

Want to stay in touch with what's happening in Glomacs?
Join the conversation on our social media channels:

Facebook Twitter LinkedinYouTube